moto.care

Benelli BN 600 GT 2016 Wartungsplan

Der folgende Wartungsplan für die Benelli BN 600 GT (2016) enthält die vom Hersteller empfohlenen Wartungsintervalle für Öl, allgemeine Wartung, Luftfilter, Kühlmittel, Zündkerzen, Antriebskettenpflege, Bremsflüssigkeit, Ventilspiel, Reifen und Batterie. Die Intervalle werden standardmäßig in Kilometern angezeigt und können auf Meilen umgestellt werden.

600ccHubraum
54Wartungspunkte
Offizielles Herstellerhandbuch

Quelle: Benelli Official Manuals (dieses Dokument deckt die Modelljahre 2014–2016 ab): cdn.keeway.com

moto.care

Verpasse nie wieder eine Wartung an deiner BN 600 GT.

Trage deinen Kilometerstand einmal ein und erhalte Erinnerungen, bevor etwas aus dieser Liste fällig wird – plus eine vollständige Wartungshistorie für jedes Motorrad, das du besitzt.

Kostenlos starten

Keine Kreditkarte erforderlich. Danach kostenloser Logbook-Plan.

Jedes Intervall auf dieser Seite im Blick
Erinnerungen, bevor etwas fällig wird
Vollständige Wartungshistorie, mit einem Tipp erfasst

Vollständiger Wartungsplan

AufgabeIntervallSchwierigkeitHinweise
Engine Oil Level Check Siehe Hinweise Einfach Check engine oil level and top up if low.
Engine Oil & Filter Change Alle 6,000 km (erstmals bei 1,000 km) · Alle 12 Monate · Ersetzen alle 6,000 km · Ersetzen alle 12 Monate Einfach Change engine oil and replace oil filter element.
Oil Filter Replacement Alle 6,000 km (erstmals bei 1,000 km) · Alle 12 Monate Einfach Replace the engine oil filter element.
Fuel Filter Check/Replacement Ersetzen alle 18,000 km Mittel Inspect and replace the in-line fuel filter.
Air Filter Check/Replacement Alle 12,000 km (erstmals bei 12,000 km) · Ersetzen alle 12,000 km Einfach Inspect air filter element and replace.
Coolant Flush & Replacement Alle 18,000 km · Alle 24 Monate · Ersetzen alle 18,000 km · Ersetzen alle 24 Monate Einfach Drain radiator, flush cooling system, and refill with specified coolant.
Cooling System Leak Check Alle 6,000 km Einfach Check coolant level and inspect cooling circuit for leaks.
Spark Plug Replacement Alle 12,000 km (erstmals bei 12,000 km) · Ersetzen alle 12,000 km Mittel Inspect and replace spark plugs (NGK CR9E).
Drive Chain Maintenance Alle 500 km · Alle 1 Monat Einfach Clean, inspect, adjust tension, and lubricate drive chain.
Rear Sprocket (Crown) Inspection Alle 6,000 km (erstmals bei 1,000 km) Mittel Check, lubricate, and inspect the rear sprocket (crown) for wear.
Front Sprocket (Pinion/Retaining Washer) Inspection Alle 6,000 km (erstmals bei 1,000 km) Mittel Check and replace the front sprocket (pinion) and retaining washer as needed.
Fuel Circuit Hoses Inspection Alle 6,000 km (erstmals bei 6,000 km) · Ersetzen alle 36 Monate Mittel Check that fuel circuit hoses are not cracked or damaged.
Brake Fluid Replacement Alle 6,000 km (erstmals bei 1,000 km) · Alle 24 Monate · Ersetzen alle 18,000 km · Ersetzen alle 24 Monate Einfach Flush and replace front and rear (and clutch, where hydraulic) hydraulic fluid.
Front/Rear Brake Fluid Gauge & Leak Check Alle 6,000 km Einfach Check the operation of the brake fluid level gauge/sight-glass and inspect for leaks.
Brake Pad Inspection/Replacement Alle 6,000 km (erstmals bei 1,000 km) Mittel Check brake pad wear and replace if worn to the limit.
Chain Slider Guide Inspection (Item 15) Alle 6,000 km (erstmals bei 1,000 km) Mittel Check the fork/swingarm chain slide guide and replace if worn to the limit.
Chain Slider Guide Inspection (Item 16) Alle 6,000 km (erstmals bei 1,000 km) Mittel Check the second (likely rear/swingarm) chain slide guide and replace if worn to the limit.
Throttle (Accelerator) Grip & Cable Check Alle 6,000 km Einfach Check throttle grip operation, adjust cable backlash, and lubricate grip housing/cable.
Clutch Control Adjustment Check Alle 6,000 km Einfach Check clutch control function and adjust as necessary.
Throttle Valve Check/Adjustment Alle 6,000 km (erstmals bei 1,000 km) Mittel Check and adjust throttle valve.
Valve Clearance Inspection Alle 24,000 km Fortgeschritten Inspect engine valve clearance and adjust as necessary.
Timing (Distribution) Chain Replacement Ersetzen alle 24,000 km Profi Replace the engine timing (distribution) chain.
Timing Chain Slides Replacement Ersetzen alle 24,000 km Profi Replace the timing (distribution) chain slides/guides.
Timing Chain Tensioner Replacement Ersetzen alle 24,000 km Profi Replace the timing (distribution) chain tensioner.
Steering Ring Nut & Sleeve Torque Check Alle 6,000 km Fortgeschritten Torque-check the steering ring nut and sleeve; adjust if necessary.
Steering Bearings Inspection Siehe Hinweise Mittel Check steering head bearings; lubricate as necessary.
Wheel Bearings Inspection Ersetzen alle 24,000 km Mittel Check front/rear wheel bearings; replace on a fixed schedule.
Fork Bearings Inspection/Replacement Alle 6,000 km (erstmals bei 6,000 km) · Ersetzen alle 24,000 km Mittel Check and replace fork bearings as necessary.
Swingarm Play/Lubrication Check Alle 6,000 km (erstmals bei 6,000 km) Mittel Check swingarm operation for excessive play; lubricate.
Front Suspension (Fork) Inspection Alle 6,000 km (erstmals bei 1,000 km) Mittel Check front suspension (fork) operation and inspect for leaks.
Front Suspension Oil Replacement Ersetzen alle 18,000 km Fortgeschritten Replace front fork suspension oil.
Rear Suspension Inspection Alle 6,000 km (erstmals bei 6,000 km) Mittel Check rear suspension function, adjustment, and inspect for leaks.
Wheels Inspection Alle 6,000 km Einfach Make sure wheels are not off-centre or damaged.
Tire Inspection & Pressure Check Alle 6,000 km Einfach Check tread depth, tire condition, and inflation pressure; correct/replace as necessary.
Side Stand Check Alle 6,000 km Einfach Check side stand operation.
Side Stand Switch Check Alle 6,000 km Einfach Check side stand cut-off switch operation.
Instruments, Lights & Switches Check Alle 6,000 km Einfach Check functionality of instruments, lights, turn signals, and switches.
Headlight Check & Aim Alle 6,000 km Einfach Check headlight operation; adjust beam aim after any change in vehicle load/set-up.
Horn (Acoustic Warning) Check Alle 6,000 km Einfach Check horn/acoustic warning operation.
Instrument Cluster Function Check Alle 6,000 km Einfach Check instrument cluster operation.
Battery Connections Check Alle 6,000 km Einfach Check battery terminal connections.
Electrical System Check Alle 6,000 km Mittel Check electrical system operation.
Switchgear Check Alle 6,000 km Einfach Check handlebar switchgear operation.
Electric Cooling Fan Check Alle 6,000 km Mittel Check electric cooling fan operation.
Idle Speed & Throttle Body Sync Check Alle 6,000 km Fortgeschritten Check idle speed and throttle body synchronisation.
Fuel/CO Emissions Check & Adjustment Alle 12,000 km (erstmals bei 12,000 km) Mittel Check fuel mixture/CO and adjust (emissions-related check).
Body/Cyclist Part Fastener Torque Check Alle 6,000 km (erstmals bei 1,000 km) Mittel Check that all cycle-part nuts, bolts, and screws are sufficiently tightened.
Oil Sump Screws Torque Check Alle 6,000 km (erstmals bei 1,000 km) Mittel Torque-check the oil sump/pan screws.
Clutch Cover (Lid) Screws Torque Check Alle 6,000 km (erstmals bei 1,000 km) Mittel Torque-check the clutch cover (lid) screws.
Catalytic Converter Check Alle 6,000 km (erstmals bei 1,000 km) · Ersetzen alle 24,000 km Mittel Check catalytic converter for faults/leaks.
Evaporative Emissions Canister Check (USA Version) Alle 6,000 km (erstmals bei 1,000 km) · Ersetzen alle 24,000 km Mittel Check evaporative emissions canister for faults/leaks (USA-spec models).
Brake/Clutch Hose Inspection Alle 6,000 km Mittel Check brake and clutch hoses for faults/leaks.
Cables & Moving Parts Check Alle 6,000 km Einfach Check parts and wires subject to movement for rubbing, wear, or damage.
Oil Suction Filter Check/Replacement Alle 6,000 km (erstmals bei 6,000 km) Mittel Check and replace the internal oil suction (pickup) filter/strainer.

Keine Wartungspunkte gefunden, die zu deiner Suche passen.

Einfach: einfache Werkzeuge, unkompliziert Einfach–Mittel: je nach Aufgabe unterschiedlich – irgendwo dazwischen Mittel: etwas technisches Verständnis hilft Fortgeschritten: spezielles Werkzeug/Können nötig, aber noch selbst machbar Experte: deutliche Erfahrung erforderlich Profi: Werkstatt oder Vertragshändler empfohlen

Was steht an?

Gib deinen aktuellen Kilometerstand (km) ein, um zu sehen, was ansteht.

Ähnliche Motorräder

Etwas falsch entdeckt?

Sag uns, was am obigen Wartungsplan für die Benelli BN 600 GT (2016) korrigiert werden muss.

Keine Datei ausgewählt