moto.care

Honda NC750X DCT 2019 Wartungsplan

Der folgende Wartungsplan für die Honda NC750X DCT (2019) enthält die vom Hersteller empfohlenen Wartungsintervalle für Luftfilter, allgemeine Wartung, Zündkerzen, Ventilspiel, Öl, Kühlmittel, Antriebskettenpflege, Bremsflüssigkeit und Reifen. Die Intervalle werden standardmäßig in Kilometern angezeigt und können auf Meilen umgestellt werden.

745ccHubraum
26Wartungspunkte
Offizielles Herstellerhandbuch

Quelle: American Honda Motor Co. (Owners Manual) (dieses Dokument deckt die Modelljahre 2018–2026 ab): hondamotopub.com

moto.care

Verpasse nie wieder eine Wartung an deiner NC750X DCT.

Trage deinen Kilometerstand einmal ein und erhalte Erinnerungen, bevor etwas aus dieser Liste fällig wird – plus eine vollständige Wartungshistorie für jedes Motorrad, das du besitzt.

Kostenlos starten

Keine Kreditkarte erforderlich. Danach kostenloser Logbook-Plan.

Jedes Intervall auf dieser Seite im Blick
Erinnerungen, bevor etwas fällig wird
Vollständige Wartungshistorie, mit einem Tipp erfasst

Vollständiger Wartungsplan

AufgabeIntervallSchwierigkeitHinweise
Air Cleaner Replacement Alle 12,000 mi (erstmals bei 12,000 mi) · Ersetzen alle 12,000 mi Einfach Replace the air cleaner element.
Crankcase Breather Cleaning Alle 4,000 mi (erstmals bei 4,000 mi) Einfach–Mittel Clean the crankcase breather.
Spark Plug Inspection and Replacement Alle 16,000 mi (erstmals bei 16,000 mi) · Ersetzen alle 32,000 mi Einfach–Mittel Inspect spark plug every 16,000 mi (25,600 km); replace every 32,000 mi (51,200 km). Standard plug: NGK IFR6G-11K, gap 0.039-0.043 in (1.00-1.10 mm).
Valve Clearance Inspection Alle 16,000 mi (erstmals bei 16,000 mi) Fortgeschritten Inspect and adjust valve clearance.
Engine Oil Change Alle 8,000 mi (erstmals bei 600 mi) · Alle 12 Monate Einfach Replace engine oil. Recommended: SAE 10W-30, API SG or higher, JASO T903 standard MA (Pro Honda GN4 4-stroke oil or equivalent).
Engine Oil Filter Replacement Alle 16,000 mi (erstmals bei 600 mi) Einfach Replace engine oil filter.
Clutch Oil Filter Replacement Alle 16,000 mi (erstmals bei 600 mi) Einfach Replace DCT clutch oil filter (separate from the engine oil filter).
Radiator Coolant Inspection and Replacement Alle 8,000 mi · Ersetzen alle 36 Monate Einfach–Mittel Inspect coolant level and condition every 8,000 mi; replace every 3 years. Recommended: Pro Honda HP Coolant.
Evaporative Emission Control System Inspection Alle 16,000 mi (erstmals bei 16,000 mi) Einfach–Mittel Inspect evaporative emission control system.
Drive Chain Inspection and Lubrication Alle 600 mi (erstmals bei 600 mi) Einfach Inspect drive chain slack and condition; lubricate chain.
Drive Chain Slider Inspection Alle 4,000 mi (erstmals bei 4,000 mi) Einfach Inspect drive chain slider for wear.
Brake Fluid Inspection and Replacement Alle 4,000 mi · Ersetzen alle 24 Monate Mittel Inspect brake fluid level and condition every 4,000 mi; replace every 2 years. Recommended: Honda DOT 4 Brake Fluid.
Brake Pads Wear Inspection Alle 4,000 mi (erstmals bei 4,000 mi) Mittel Inspect front and rear brake pads for wear.
Brake System Inspection Alle 8,000 mi (erstmals bei 8,000 mi) Mittel Inspect overall brake system operation.
Brake Light Switch Inspection Alle 8,000 mi (erstmals bei 8,000 mi) Einfach–Mittel Inspect front and rear brake light switch operation.
Brake Lock (Parking Brake) Operation Inspection Alle 4,000 mi (erstmals bei 4,000 mi) Mittel Inspect parking brake lock operation.
Headlight Aim Inspection Alle 8,000 mi (erstmals bei 8,000 mi) Einfach–Mittel Inspect and adjust headlight aim as needed.
Side Stand Inspection Alle 8,000 mi (erstmals bei 8,000 mi) Einfach Inspect side stand and side stand ignition cut-off system operation.
Suspension Inspection Alle 8,000 mi (erstmals bei 8,000 mi) Mittel Inspect front and rear suspension operation.
Nuts, Bolts, Fasteners Inspection Alle 8,000 mi (erstmals bei 8,000 mi) Einfach Inspect and tighten chassis nuts, bolts, and fasteners.
Wheels and Tires Inspection Alle 8,000 mi (erstmals bei 8,000 mi) Mittel Inspect wheels for damage and tires for wear/damage; check air pressure.
Steering Head Bearings Inspection Alle 8,000 mi (erstmals bei 8,000 mi) Fortgeschritten Inspect steering head bearings for looseness or damage.
Throttle Operation Inspection Alle 8,000 mi (erstmals bei 8,000 mi) Einfach–Mittel Inspect throttle grip free play; verify throttle operates smoothly and returns automatically without binding.
Engine Idle Speed Inspection Alle 8,000 mi (erstmals bei 8,000 mi) Einfach–Mittel Inspect engine idle speed. Non-adjustable; spec 1,200 +/-100 rpm.
Fuel Line Inspection Alle 8,000 mi (erstmals bei 8,000 mi) Einfach–Mittel Inspect fuel line and connections for leaks, cracks, or deterioration.
Cooling System Inspection Alle 8,000 mi (erstmals bei 8,000 mi) Einfach–Mittel Inspect cooling system (hoses, radiator, connections) for leaks and damage.

Keine Wartungspunkte gefunden, die zu deiner Suche passen.

Einfach: einfache Werkzeuge, unkompliziert Einfach–Mittel: je nach Aufgabe unterschiedlich – irgendwo dazwischen Mittel: etwas technisches Verständnis hilft Fortgeschritten: spezielles Werkzeug/Können nötig, aber noch selbst machbar Experte: deutliche Erfahrung erforderlich Profi: Werkstatt oder Vertragshändler empfohlen

Was steht an?

Gib deinen aktuellen Kilometerstand (km) ein, um zu sehen, was ansteht.

Ähnliche Motorräder

Etwas falsch entdeckt?

Sag uns, was am obigen Wartungsplan für die Honda NC750X DCT (2019) korrigiert werden muss.

Keine Datei ausgewählt