moto.care

Husqvarna TE 250 2023 Wartungsplan

Der folgende Wartungsplan für die Husqvarna TE 250 (2023) enthält die vom Hersteller empfohlenen Wartungsintervalle für allgemeine Wartung, Batterie, Bremsflüssigkeit, Zündkerzen, Antriebskettenpflege, Luftfilter, Öl, Kühlmittel und Reifen. Die Intervalle werden standardmäßig in Kilometern angezeigt und können auf Meilen umgestellt werden.

250ccHubraum
61Wartungspunkte
Offizielles Herstellerhandbuch

Quelle: Husqvarna 2023 TE 250 TE 300 Owner's Manual: irp.cdn-website.com

moto.care

Verpasse nie wieder eine Wartung an deiner TE 250.

Trage deinen Kilometerstand einmal ein und erhalte Erinnerungen, bevor etwas aus dieser Liste fällig wird – plus eine vollständige Wartungshistorie für jedes Motorrad, das du besitzt.

Kostenlos starten

Keine Kreditkarte erforderlich. Danach kostenloser Logbook-Plan.

Jedes Intervall auf dieser Seite im Blick
Erinnerungen, bevor etwas fällig wird
Vollständige Wartungshistorie, mit einem Tipp erfasst

Vollständiger Wartungsplan

AufgabeIntervallSchwierigkeitHinweise
Lubricate the steering head bearing Alle 12 Monate Mittel Grease steering head bearing.
Check and charge the 12-V battery Alle 20 Betriebsstunden Einfach Check battery charge state, charge if needed.
Check the front brake linings Alle 20 Betriebsstunden Einfach Check front brake pad wear.
Check the brake linings of the rear brake Alle 20 Betriebsstunden Einfach Check rear brake pad wear.
Check the brake lines for damage and leakage Alle 20 Betriebsstunden Einfach Inspect brake lines.
Check the rear brake fluid level Alle 20 Betriebsstunden Einfach Check rear brake fluid reservoir level.
Check the free travel of the foot brake lever Alle 20 Betriebsstunden Einfach Check rear brake pedal free play.
Check the frame Alle 20 Betriebsstunden Mittel Inspect frame for damage/cracks.
Check the link fork Alle 20 Betriebsstunden Mittel Inspect linkage fork.
Check the fork bearing for play Alle 20 Betriebsstunden Mittel Check front fork bearing play.
Check the shock absorber heim joint for play Alle 20 Betriebsstunden Mittel Check shock heim joint play.
Check the shock absorber linkage Alle 20 Betriebsstunden Mittel Check shock linkage.
Check/correct the fluid level of hydraulic clutch Alle 20 Betriebsstunden Einfach Check hydraulic clutch fluid level.
Check the front brake fluid level Alle 20 Betriebsstunden Einfach Check front brake fluid level.
Change the spark plug and spark plug connector Alle 40 Betriebsstunden Einfach Replace spark plug and connector.
Check the reed valve housing, reed valve and intake flange Alle 20 Betriebsstunden Mittel Inspect reed valve assembly and intake flange.
Check the brake discs Alle 20 Betriebsstunden Einfach Check front/rear brake disc condition.
Check the wheel bearing for play Alle 20 Betriebsstunden Mittel Check wheel bearing play.
Check the wheel hubs Alle 20 Betriebsstunden Einfach Check wheel hub condition.
Check the chain, rear sprocket, engine sprocket, and chain guide Alle 20 Betriebsstunden Einfach Inspect drive chain and sprockets.
Check the chain tension Alle 20 Betriebsstunden Einfach Check/adjust chain tension.
Grease all moving parts and check for smooth operation Alle 20 Betriebsstunden Einfach Grease side stand, hand lever, chain, etc.
Check the cables for damage and for routing without kinks Alle 20 Betriebsstunden Einfach Inspect control cables.
Check that the throttle cables are undamaged, routed without sharp bends, and set correctly Alle 20 Betriebsstunden Einfach Inspect throttle cable routing/adjustment.
Clean the air filter and air filter box Alle 20 Betriebsstunden Einfach Clean air filter element and airbox.
Change the glass fiber yarn filling of the main silencer Alle 20 Betriebsstunden Mittel Repack main silencer glass-fiber baffling.
Service the fork Alle 40 Betriebsstunden Fortgeschritten Full fork service (required-work base interval).
Perform the shock absorber service Alle 40 Betriebsstunden Fortgeschritten Full shock absorber service (required-work base interval).
Check the fuel pressure Alle 20 Betriebsstunden Mittel Check fuel delivery pressure.
Check the idle speed Alle 20 Betriebsstunden Einfach Check idle speed.
Change the front brake fluid Alle 12 Monate Mittel Replace front brake fluid.
Change the rear brake fluid Alle 12 Monate Mittel Replace rear brake fluid.
Change the hydraulic clutch fluid Alle 12 Monate Mittel Replace hydraulic clutch fluid.
Clean the pressure sensor hose Alle 12 Monate · Alle 80 Betriebsstunden Einfach Clean the atmospheric pressure sensor hose.
Service the fork (recommended, initial) Siehe Hinweise Fortgeschritten One-time initial competition fork service.
Perform the shock absorber service (recommended, initial) Siehe Hinweise Fortgeschritten One-time initial competition shock service.
Check the electric starter drive Alle 80 Betriebsstunden Mittel Inspect electric starter drive mechanism.
Change the fuel filter Alle 80 Betriebsstunden Einfach Replace fuel filter.
Change the piston and check the cylinder Alle 80 Betriebsstunden Fortgeschritten Replace piston/rings, inspect cylinder bore.
Change the oil pump; clean the oil screen Alle 80 Betriebsstunden Mittel Replace oil pump, clean oil screen.
Clean the oil screen in the oil tank Alle 40 Betriebsstunden Einfach Clean oil tank strainer screen.
Clean the protection cap of the pressure sensor Alle 40 Betriebsstunden Einfach Clean pressure sensor protective cap.
Change the coolant Alle 48 Monate Mittel Drain and replace coolant.
Perform minor engine service Alle 40 Betriebsstunden Mittel Check power valve/exhaust control function and smooth operation; check clutch.
Perform major engine service Alle 80 Betriebsstunden Experte Remove/install engine; change connecting rod, conrod bearing and crank pin; clean pressure sensor hose connections; check transmission/shift mechanism; change all engine bearings.
Read out the fault memory using the Husqvarna Motorcycles diagnostics tool Alle 20 Betriebsstunden Einfach Read ECU fault memory with diagnostics tool.
Check that the electrical system is functioning properly Alle 20 Betriebsstunden Einfach Check electrical system operation.
Check the spoke tension Alle 20 Betriebsstunden Einfach Check/adjust spoke tension.
Check the steering head bearing for play Alle 20 Betriebsstunden Mittel Check steering head bearing play.
Change the gear oil Alle 40 Betriebsstunden Mittel Change transmission gear oil.
Check all hoses and sleeves for cracking, leaks, and incorrect routing Alle 20 Betriebsstunden Einfach Inspect fuel, cooling, bleeder, and drainage hoses.
Check the antifreeze and coolant level Alle 20 Betriebsstunden Einfach Check coolant level.
Check the tire condition Alle 20 Betriebsstunden Einfach Inspect tire tread/casing.
Check tire pressure Alle 20 Betriebsstunden Einfach Check/adjust tire pressure.
Check the rim run-out Alle 20 Betriebsstunden Mittel Check wheel rim trueness.
Change the fuel screen Alle 20 Betriebsstunden Einfach Replace in-tank fuel screen/strainer.
Check the tightness of the easily accessible, safety-relevant screws and nuts Alle 20 Betriebsstunden Einfach Check fastener tightness.
Check the headlight setting Alle 20 Betriebsstunden Einfach Check/adjust headlight aim.
Final check: check the vehicle for operating safety and take a test ride Alle 20 Betriebsstunden Einfach Road test and final safety check.
Read out the fault memory after the test ride Alle 20 Betriebsstunden Einfach Re-check ECU fault memory post-test-ride.
Make a service entry in Husqvarna Motorcycles Dealer.net Alle 20 Betriebsstunden Einfach Log service in dealer system.

Keine Wartungspunkte gefunden, die zu deiner Suche passen.

Einfach: einfache Werkzeuge, unkompliziert Einfach–Mittel: je nach Aufgabe unterschiedlich – irgendwo dazwischen Mittel: etwas technisches Verständnis hilft Fortgeschritten: spezielles Werkzeug/Können nötig, aber noch selbst machbar Experte: deutliche Erfahrung erforderlich Profi: Werkstatt oder Vertragshändler empfohlen

Was steht an?

Gib deinen aktuellen Kilometerstand (km) ein, um zu sehen, was ansteht.

Ähnliche Motorräder

Etwas falsch entdeckt?

Sag uns, was am obigen Wartungsplan für die Husqvarna TE 250 (2023) korrigiert werden muss.

Keine Datei ausgewählt