moto.care

Husqvarna TE 250i 2018 Wartungsplan

Der folgende Wartungsplan für die Husqvarna TE 250i (2018) enthält die vom Hersteller empfohlenen Wartungsintervalle für allgemeine Wartung, Bremsflüssigkeit, Antriebskettenpflege, Batterie, Zündkerzen, Öl, Luftfilter, Reifen und Kühlmittel. Die Intervalle werden standardmäßig in Kilometern angezeigt und können auf Meilen umgestellt werden.

250ccHubraum
59Wartungspunkte
Offizielles Herstellerhandbuch

Quelle: Husqvarna 2018 TE 250i TE 300i Owner's Manual (official content, mirrored via en.enduro.team): en.enduro.team

moto.care

Verpasse nie wieder eine Wartung an deiner TE 250i.

Trage deinen Kilometerstand einmal ein und erhalte Erinnerungen, bevor etwas aus dieser Liste fällig wird – plus eine vollständige Wartungshistorie für jedes Motorrad, das du besitzt.

Kostenlos starten

Keine Kreditkarte erforderlich. Danach kostenloser Logbook-Plan.

Jedes Intervall auf dieser Seite im Blick
Erinnerungen, bevor etwas fällig wird
Vollständige Wartungshistorie, mit einem Tipp erfasst

Vollständiger Wartungsplan

AufgabeIntervallSchwierigkeitHinweise
Check the brake lines for damage and leakage Alle 20 Betriebsstunden Einfach Inspect brake lines.
Check the rear brake fluid level Alle 20 Betriebsstunden Einfach Check rear brake fluid reservoir level.
Check the frame Alle 20 Betriebsstunden Mittel Inspect frame for damage/cracks.
Check the rim run-out Alle 20 Betriebsstunden Mittel Check wheel rim trueness.
Check the chain tension Alle 20 Betriebsstunden Einfach Check/adjust chain tension.
Check and charge the battery Alle 20 Betriebsstunden Einfach Check battery charge state, charge if needed.
Check the front brake linings Alle 20 Betriebsstunden Einfach Check front brake pad wear.
Check the brake linings of the rear brake Alle 20 Betriebsstunden Einfach Check rear brake pad wear.
Check the brake discs Alle 20 Betriebsstunden Einfach Check front/rear brake disc condition.
Check the wheel bearing for play Alle 20 Betriebsstunden Mittel Check wheel bearing play.
Check the chain, rear sprocket, engine sprocket, and chain guide Alle 20 Betriebsstunden Einfach Inspect drive chain and sprockets.
Grease all moving parts and check for smooth operation Alle 20 Betriebsstunden Einfach Grease side stand, hand lever, chain, etc.
Check/correct the fluid level of the hydraulic clutch Alle 20 Betriebsstunden Einfach Check hydraulic clutch fluid level.
Check the front brake fluid level Alle 20 Betriebsstunden Einfach Check front brake fluid level.
Check the free travel of the hand brake lever Alle 20 Betriebsstunden Einfach Check front brake lever free play.
Change the spark plug and spark plug connector Alle 40 Betriebsstunden Einfach Replace spark plug and connector.
Check the reed valve housing, reed valve, and intake flange Alle 20 Betriebsstunden Mittel Inspect reed valve assembly and intake flange.
Check the fuel pressure Alle 20 Betriebsstunden Mittel Check TPI fuel delivery pressure.
Check idle Alle 20 Betriebsstunden Einfach Check idle speed.
Change the front brake fluid Alle 12 Monate Mittel Replace front brake fluid.
Change the rear brake fluid Alle 12 Monate Mittel Replace rear brake fluid.
Change the hydraulic clutch fluid Alle 12 Monate Mittel Replace hydraulic clutch fluid.
Grease the steering head bearing Alle 12 Monate Mittel Grease steering head bearing.
Clean the pressure sensor hose Alle 12 Monate · Alle 80 Betriebsstunden Einfach Clean the atmospheric pressure sensor hose.
Service the fork (recommended, initial) Siehe Hinweise Fortgeschritten One-time initial competition fork service.
Service the shock absorber (recommended, initial) Siehe Hinweise Fortgeschritten One-time initial competition shock service.
Check the electric starter drive Alle 80 Betriebsstunden Mittel Inspect electric starter drive mechanism.
Change the fuel filter Alle 80 Betriebsstunden Einfach Replace fuel filter.
Change the piston and check the cylinder Alle 80 Betriebsstunden Fortgeschritten Replace piston/rings, inspect cylinder bore.
Replace the oil pump Alle 80 Betriebsstunden Mittel Replace the TPI autolube oil injection pump.
Perform minor engine service Alle 40 Betriebsstunden Mittel Check power valve/exhaust control function and smooth operation; check clutch.
Perform major engine service Alle 80 Betriebsstunden Experte Remove/install engine; change connecting rod, conrod bearing and crank pin; clean pressure sensor cylinder connection; check transmission/shift mechanism; change all engine bearings.
Check the free travel of the foot brake lever Alle 20 Betriebsstunden Einfach Check rear brake pedal free play.
Check the swingarm Alle 20 Betriebsstunden Mittel Inspect swingarm for damage.
Check the swingarm bearing for play Alle 20 Betriebsstunden Mittel Check swingarm bearing play.
Check the heim joint for play Alle 20 Betriebsstunden Mittel Check shock heim joint play.
Check the shock absorber linkage Alle 20 Betriebsstunden Mittel Check shock linkage.
Check the wheel hubs Alle 20 Betriebsstunden Einfach Check wheel hub condition.
Check the cables for damage and for routing without kinks Alle 20 Betriebsstunden Einfach Inspect control cables.
Clean the air filter and air filter box Alle 20 Betriebsstunden Einfach Clean air filter element and airbox.
Change glass fiber yarn filling in the main silencer Alle 20 Betriebsstunden Mittel Repack main silencer glass-fiber baffling.
Service the fork Alle 40 Betriebsstunden Fortgeschritten Full fork service (required-work base interval).
Service the shock absorber Alle 40 Betriebsstunden Fortgeschritten Full shock absorber service (required-work base interval).
Check that the electrical system is functioning properly Alle 20 Betriebsstunden Einfach Check electrical system operation.
Read out the fault memory using the Husqvarna Motorcycles diagnostics tool Alle 20 Betriebsstunden Einfach Read ECU fault memory with diagnostics tool.
Check the play of the steering head bearing Alle 20 Betriebsstunden Mittel Check steering head bearing play.
Change the gear oil Alle 40 Betriebsstunden Mittel Change transmission gear oil.
Check all hoses and sleeves for cracking, leaks, and incorrect routing Alle 20 Betriebsstunden Einfach Inspect fuel, cooling, bleeder, and drainage hoses.
Change the fuel screen Alle 20 Betriebsstunden Einfach Replace in-tank fuel screen/strainer.
Check the headlight setting Alle 20 Betriebsstunden Einfach Check/adjust headlight aim.
Final check: check the vehicle for operating safety and take a test ride Alle 20 Betriebsstunden Einfach Road test and final safety check.
Read out the fault memory after the test ride Alle 20 Betriebsstunden Einfach Re-check ECU fault memory post-test-ride.
Make the service entry in the Husqvarna Motorcycles Dealer.net and in the Service and Warranty Booklet Alle 20 Betriebsstunden Einfach Log service in dealer system and booklet.
Check the tire condition Alle 20 Betriebsstunden Einfach Inspect tire tread/casing.
Check the tire air pressure Alle 20 Betriebsstunden Einfach Check/adjust tire pressure.
Check the spoke tension Alle 20 Betriebsstunden Einfach Check/adjust spoke tension.
Check the antifreeze and coolant level Alle 20 Betriebsstunden Einfach Check coolant level.
Check that the throttle cables are undamaged, routed without sharp bends, and set correctly Alle 20 Betriebsstunden Einfach Inspect throttle cable routing/adjustment.
Check the screws and nuts for tightness Alle 20 Betriebsstunden Einfach Check fastener tightness.

Keine Wartungspunkte gefunden, die zu deiner Suche passen.

Einfach: einfache Werkzeuge, unkompliziert Einfach–Mittel: je nach Aufgabe unterschiedlich – irgendwo dazwischen Mittel: etwas technisches Verständnis hilft Fortgeschritten: spezielles Werkzeug/Können nötig, aber noch selbst machbar Experte: deutliche Erfahrung erforderlich Profi: Werkstatt oder Vertragshändler empfohlen

Was steht an?

Gib deinen aktuellen Kilometerstand (km) ein, um zu sehen, was ansteht.

Ähnliche Motorräder

Etwas falsch entdeckt?

Sag uns, was am obigen Wartungsplan für die Husqvarna TE 250i (2018) korrigiert werden muss.

Keine Datei ausgewählt