Harley-Davidson CVO Softail models 2010: programa de mantenimiento
El siguiente programa de mantenimiento de la Harley-Davidson CVO Softail models de 2010 recoge los intervalos de mantenimiento recomendados por el fabricante para aceite, bujías, mantenimiento general, filtro de aire, neumáticos, mantenimiento de la cadena de transmisión, líquido de frenos y batería. Los intervalos se muestran en kilómetros de forma predeterminada y se pueden cambiar a millas.
Fuente: Harley-Davidson 2007 Softail Service Manual (99482-07) (este documento cubre los años de modelo 2000–2017): s7ff0053a05385399.jimcontent.com
Programa completo
| Tarea | Intervalo | Dificultad | Notas |
|---|---|---|---|
| Primary chaincase lubricant change | Cada 16,000 km (primera vez a 1,600 km) | Fácil | Replace primary chaincase lubricant. |
| Transmission lubricant change | Cada 32,000 km (primera vez a 1,600 km) · Cada 24 meses | Fácil | Replace transmission lubricant. |
| Spark plug replacement | Cada 32,000 km | Fácil | Replace spark plugs (HD-6R12, gap 0.038-0.043 in / 0.97-1.09 mm, torque 12-18 ft-lbs / 16-24 Nm). |
| Engine oil and filter change | Cada 8,000 km (primera vez a 1,600 km) | Fácil | Replace engine oil and oil filter. |
| Oil lines and brake system leak inspection | Cada 8,000 km (primera vez a 1,600 km) | Fácil | Inspect oil lines and brake hydraulic system for leaks. |
| Air cleaner inspection and service | Cada 8,000 km (primera vez a 1,600 km) | Fácil | Inspect air cleaner element and service as required. |
| Tire pressure and tread inspection | Cada 8,000 km (primera vez a 1,600 km) | Fácil | Check cold tire inflation pressure and inspect tread depth. |
| Wheel spoke tightness check (spoke-wheel option only) | Cada 32,000 km (primera vez a 1,600 km) | Fácil | Check tightness of wheel spokes on the laced/spoke-wheel option. |
| Clutch adjustment check | Cada 8,000 km (primera vez a 1,600 km) | Fácil | Check clutch free-play adjustment. |
| Rear belt and sprockets inspection/adjustment | Cada 8,000 km (primera vez a 1,600 km) | Moderado | Inspect final drive belt condition and sprocket wear; adjust belt deflection. |
| Throttle, brake and clutch control check/adjust/lube | Cada 8,000 km (primera vez a 1,600 km) | Fácil | Check, adjust, and lubricate throttle, brake, and clutch controls/cables. |
| Jiffy stand inspection and lubrication | Cada 16,000 km (primera vez a 1,600 km) | Fácil | Inspect side (jiffy) stand and lubricate pivot. |
| Fuel lines and fittings leak inspection | Cada 8,000 km (primera vez a 1,600 km) | Fácil | Inspect fuel lines and fittings for leaks. |
| Fuel tank filter replacement | Cada 40,000 km | Fácil | Replace in-tank fuel filter. |
| Brake fluid level and condition check | Cada 8,000 km (primera vez a 1,600 km) | Fácil | Check front and rear brake fluid reservoir levels and condition. |
| Brake fluid flush and replacement (DOT 4) | Cada 24 meses | Moderado | Flush and replace DOT 4 brake fluid, front and rear. |
| Brake pads and discs wear inspection | Cada 8,000 km (primera vez a 1,600 km) | Fácil | Inspect front and rear brake pads and discs for wear. |
| Spark plug inspection | Cada 8,000 km (primera vez a 1,600 km) | Fácil | Inspect spark plugs. |
| Electrical equipment and switches check | Cada 8,000 km (primera vez a 1,600 km) | Fácil | Check operation of electrical equipment and switches. |
| Engine idle speed check/adjustment | Cada 8,000 km (primera vez a 1,600 km) | Fácil | Check and adjust engine idle speed. |
| Fuel door, tour-pak and saddlebag hinge/latch lubrication | Cada 8,000 km (primera vez a 1,600 km) | Fácil | Lubricate hinges and latches on fuel door, tour-pak, and saddlebags (if equipped). |
| Critical fastener tightness check | Cada 16,000 km (primera vez a 1,600 km) | Moderado | Check tightness of critical chassis and engine fasteners. |
| Battery inspection and terminal cleaning | Cada 12 meses | Fácil | Check battery state of charge and clean terminal connections. |
| Road test (component and system function check) | Cada 8,000 km (primera vez a 1,600 km) | Fácil | Road test motorcycle to verify component and system functions. |
| Steering head bearings adjustment (hydraulic fork) | Cada 16,000 km (primera vez a 1,600 km) | Moderado | Check and adjust steering head bearing play. |
| Steering head bearings disassembly, lubrication and inspection (hydraulic fork, dealer) | Cada 48,000 km | Avanzado | Disassemble, lubricate, and inspect steering head bearings (dealer service). |
| Front fork oil replacement | Cada 80,000 km | Avanzado | Replace front fork (hydraulic) oil. |
| Rear fork/swingarm bearings repack (if equipped) | Cada 32,000 km | Avanzado | Repack rear fork (swingarm) pivot bearings. |
| Windshield bushings inspection (if equipped) | Cada 16,000 km | Fácil | Inspect windshield mounting bushings. |
Ningún elemento de mantenimiento coincide con tu búsqueda.
Fácil: herramientas básicas, sencillo Fácil–Moderado: varía según la tarea, entre ambos niveles Moderado: ayuda tener algo de conocimiento mecánico Avanzado: requiere herramientas o habilidad especializada, aún viable por tu cuenta Experto: requiere experiencia considerable Profesional: se recomienda taller o concesionario
¿Qué toca?
Introduce tu kilometraje actual (km) para ver qué se acerca.
Motos relacionadas
¿Has visto algo mal?
Cuéntanos qué hay que corregir en el programa de arriba para la Harley-Davidson CVO Softail models de 2010.