Honda CB400 Super Four (CB400SF) Hyper VTEC Revo 2008: programa de mantenimiento
El siguiente programa de mantenimiento de la Honda CB400 Super Four (CB400SF) Hyper VTEC Revo de 2008 recoge los intervalos de mantenimiento recomendados por el fabricante para mantenimiento general, aceite, filtro de aire, mantenimiento de la cadena de transmisión, líquido de frenos, neumáticos, refrigerante y batería. Los intervalos se muestran en kilómetros de forma predeterminada y se pueden cambiar a millas.
Fuente: Honda Motor Co., Ltd. (Japan - Motopub HMJ) (Owners Manual): 2rom-prd-data.hondamotopub.com
Programa completo
| Tarea | Intervalo | Dificultad | Notas |
|---|---|---|---|
| Initial break-in inspection | Ver notas | Fácil–Moderado | First scheduled inspection, performed free of charge at the selling Honda dealer, at 1 month after purchase or 1,000 km, whichever comes first |
| Engine oil change | Cada 10,000 km (primera vez a 1,000 km) · Cada 12 meses | Fácil | Change engine oil: initial change at 1,000 km or 1 month, then every 10,000 km or 12 months thereafter |
| Air cleaner element replacement | Cada 40,000 km | Fácil | Replace the viscous paper-oil air cleaner element; no periodic inspection or cleaning is needed, only replacement at this interval |
| Drive chain slack inspection and adjustment | Cada 12 meses | Fácil | Check drive chain slack at the center of the run with the bike on its stand; adjust if outside 25-35mm. Do not ride if slack exceeds 50mm |
| Drive chain lubrication and cleaning | Ver notas | Fácil | Clean dirt and mud from the chain and sprockets with a brush, then lubricate the chain rollers on both sides |
| Breather drain cleaning | Cada 12 meses | Fácil | Remove the breather drain plug and clear accumulated sediment/condensate from the crankcase breather drain |
| Brake fluid level inspection | Ver notas | Moderado | Check front and rear brake fluid reservoir levels are within the upper/lower marks |
| Brake pad wear inspection | Ver notas | Fácil–Moderado | Inspect the brake pad wear-limit grooves on front and rear calipers; replace both pads on a wheel together if the groove has disappeared or has reached the disc surface |
| Tire pressure inspection | Cada 1 mes | Moderado | Check cold tire pressure with a gauge at least once a month |
| Tire tread depth and damage inspection | Ver notas | Moderado | Check tread depth via the wear indicator (slip sign), inspect the full circumference for cracks/cuts/embedded objects, and check for abnormal or uneven wear |
| Coolant level inspection | Ver notas | Fácil–Moderado | Check coolant level in the reservoir tank is between the upper and lower marks, viewed via the right side cover |
| Clutch lever play inspection | Ver notas | Fácil–Moderado | Check clutch lever free play against spec; adjust at the lever-side or cable-side adjuster if outside range |
| Battery inspection | Ver notas | Fácil | Check the sealed maintenance-free battery's terminals for corrosion/dirt and clean if needed; no electrolyte check or refill is required or possible |
| Fuse inspection | Ver notas | Fácil | Check fuses for continuity if an electrical component fails to operate, and replace with a fuse of the same amperage rating if blown |
| Clutch and throttle cable/wire inspection | Ver notas | Fácil–Moderado | Operate the clutch lever and throttle grip and check for smooth movement, no excess resistance, and proper spring return; inspect cable outer housings for damage |
Ningún elemento de mantenimiento coincide con tu búsqueda.
Fácil: herramientas básicas, sencillo Fácil–Moderado: varía según la tarea, entre ambos niveles Moderado: ayuda tener algo de conocimiento mecánico Avanzado: requiere herramientas o habilidad especializada, aún viable por tu cuenta Experto: requiere experiencia considerable Profesional: se recomienda taller o concesionario
¿Qué toca?
Introduce tu kilometraje actual (km) para ver qué se acerca.
Motos relacionadas
¿Has visto algo mal?
Cuéntanos qué hay que corregir en el programa de arriba para la Honda CB400 Super Four (CB400SF) Hyper VTEC Revo de 2008.