Honda VT1300CX Fury 2017: programa de mantenimiento
El siguiente programa de mantenimiento de la Honda VT1300CX Fury de 2017 recoge los intervalos de mantenimiento recomendados por el fabricante para mantenimiento general, aceite, líquido de frenos, filtro de aire, bujías, holgura de válvulas, neumáticos y refrigerante. Los intervalos se muestran en kilómetros de forma predeterminada y se pueden cambiar a millas.
1312ccCilindrada
25Elementos de mantenimiento
Manual oficial del fabricante
Fuente: Honda MotoPub AHM (United States), direct fetch (Owners Manual) (este documento cubre los años de modelo 2016–2017): 2rom-prd-data.hondamotopub.com
Programa completo
| Tarea | Intervalo | Dificultad | Notas |
|---|---|---|---|
| Clutch System Inspection | Cada 4,000 mi | Fácil–Moderado | Inspect clutch system operation and lever freeplay every 4,000 mi. Refer to manual page 81. |
| Fuel Line Inspection | Cada 8,000 mi | Moderado | Inspect fuel line and connections for leaks, cracks, or deterioration every 8,000 mi. |
| Throttle Operation Inspection | Cada 8,000 mi | Fácil–Moderado | Check throttle grip freeplay and confirm smooth operation without binding or sticking every 8,000 mi. Refer to manual page 84. |
| Engine Oil Filter Replacement | Cada 8,000 mi (primera vez a 600 mi) | Fácil | Replace engine oil filter. Initial replacement at 600 mi (shared with the first oil change), then every 8,000 mi thereafter. Refer to manual page 70. |
| Engine Idle Speed Check | Cada 4,000 mi | Fácil–Moderado | Inspect and adjust engine idle speed. Charted at every 4,000-mile checkpoint (0.6K, 4K, 8K, 12K, 16K, 20K, 24K). |
| Evaporative Emission Control System Inspection | Cada 12,000 mi | Moderado | Inspect evaporative emission control system every 12,000 mi. |
| Final Drive Oil Inspection/Replacement | Cada 8,000 mi · Sustituir cada 24,000 mi | Moderado | Inspect final drive (shaft drive) oil level every 8,000 mi; replace every 24,000 mi. Refer to manual page 75. |
| Brake Fluid Inspection/Replacement | Cada 4,000 mi · Sustituir cada 12,000 mi · Sustituir cada 24 meses | Moderado | Inspect brake fluid level and condition every 4,000 mi; replace every 12,000 mi or 2 years, whichever comes first. Refer to manual page 77. |
| Air Cleaner Element Replacement | Cada 12,000 mi | Fácil | Replace the air cleaner (air filter) element every 12,000 mi. Refer to manual page 72. |
| Crankcase Breather Cleaning | Cada 4,000 mi | Fácil | Clean the crankcase breather, draining deposits from the transparent section of the drain tube, every 4,000 mi starting at the 4,000 mi checkpoint. Refer to manual page 85. |
| Spark Plugs Inspection/Replacement | Cada 4,000 mi · Sustituir cada 8,000 mi | Fácil–Moderado | Inspect spark plugs every 4,000 mi (at the 4K/12K/20K odometer checkpoints); replace every 8,000 mi (at the 8K/16K/24K checkpoints). Refer to manual page 64. |
| Valve Clearance Inspection | Cada 8,000 mi (primera vez a 600 mi) | Avanzado | Inspect and adjust valve clearance. Initial check at 600 mi (1 month), then every 8,000 mi thereafter. |
| Engine Oil Change | Cada 8,000 mi (primera vez a 600 mi) · Cada 12 meses | Fácil | Replace engine oil. Initial change at 600 mi (1,000 km) or 1 month; regular change every 8,000 mi (12,800 km) or 12 months, whichever comes first. Refer to manual page 70. |
| Secondary Air Supply System Inspection | Cada 8,000 mi | Moderado | Inspect secondary air supply system every 8,000 mi. |
| Brake Pads Wear Inspection | Cada 4,000 mi | Fácil–Moderado | Inspect front and rear brake pads for wear every 4,000 mi. Refer to manual page 78. |
| Brake System Inspection | Cada 8,000 mi (primera vez a 600 mi) | Moderado | Inspect brake system (lines, lever and pedal operation). Initial check at 600 mi, then every 8,000 mi. Refer to manual page 77. |
| Brake Light Switch Inspection | Cada 8,000 mi | Fácil | Inspect brake light switch operation every 8,000 mi. Refer to manual page 79. |
| Headlight Aim Inspection | Cada 8,000 mi | Fácil–Moderado | Check and adjust headlight aim every 8,000 mi. Refer to manual page 86. |
| Side Stand Inspection | Cada 8,000 mi | Fácil–Moderado | Inspect side stand operation (spring tension, pivot, ignition cutoff switch) every 8,000 mi. Refer to manual page 80. |
| Suspension Inspection | Cada 8,000 mi | Moderado | Inspect front and rear suspension every 8,000 mi. Refer to manual page 87. |
| Nuts, Bolts, and Fasteners Inspection | Cada 8,000 mi (primera vez a 600 mi) | Fácil–Moderado | Check and tighten major nuts, bolts, and fasteners. Initial check at 600 mi, then every 8,000 mi. |
| Wheels and Tires Inspection | Cada 8,000 mi | Moderado | Inspect wheels and tires (tread wear, air pressure, damage) every 8,000 mi. Refer to manual page 53. |
| Steering Head Bearings Inspection | Cada 8,000 mi (primera vez a 600 mi) | Avanzado | Inspect steering head bearings for looseness or roughness. Initial check at 600 mi, then every 8,000 mi. |
| Radiator Coolant Inspection/Replacement | Cada 8,000 mi · Sustituir cada 24,000 mi · Sustituir cada 24 meses | Fácil–Moderado | Inspect coolant level and condition every 8,000 mi; replace coolant every 24,000 mi or 2 years, whichever comes first. Refer to manual page 73. |
| Cooling System Inspection | Cada 8,000 mi | Fácil–Moderado | Inspect cooling system (hoses, radiator, connections) for leaks or damage every 8,000 mi. |
Ningún elemento de mantenimiento coincide con tu búsqueda.
Fácil: herramientas básicas, sencillo Fácil–Moderado: varía según la tarea, entre ambos niveles Moderado: ayuda tener algo de conocimiento mecánico Avanzado: requiere herramientas o habilidad especializada, aún viable por tu cuenta Experto: requiere experiencia considerable Profesional: se recomienda taller o concesionario
¿Qué toca?
Introduce tu kilometraje actual (km) para ver qué se acerca.
Motos relacionadas
¿Has visto algo mal?
Cuéntanos qué hay que corregir en el programa de arriba para la Honda VT1300CX Fury de 2017.