Husqvarna TE 300i 2018 Maintenance Schedule
The 2018 Husqvarna TE 300i maintenance schedule below covers the manufacturer's recommended service intervals for general maintenance, battery, drive chain maintenance, brake fluid, spark plugs, air filter, oil, tires and coolant. Intervals are shown in kilometres by default and can be switched to miles.
300ccEngine size
59Maintenance items
Official manufacturer manual
Sourced from Husqvarna 2018 TE 250i TE 300i Owner's Manual (official content, mirrored via en.enduro.team): en.enduro.team
Full schedule
| Task | Interval | Difficulty | Notes |
|---|---|---|---|
| Read out the fault memory using the Husqvarna Motorcycles diagnostics tool | Every 20 operating hours | Easy | Read ECU fault memory with diagnostics tool. |
| Check and charge the battery | Every 20 operating hours | Easy | Check battery charge state, charge if needed. |
| Check the brake lines for damage and leakage | Every 20 operating hours | Easy | Inspect brake lines. |
| Check the front brake linings | Every 20 operating hours | Easy | Check front brake pad wear. |
| Check the brake linings of the rear brake | Every 20 operating hours | Easy | Check rear brake pad wear. |
| Check the brake discs | Every 20 operating hours | Easy | Check front/rear brake disc condition. |
| Check the frame | Every 20 operating hours | Moderate | Inspect frame for damage/cracks. |
| Check the swingarm | Every 20 operating hours | Moderate | Inspect swingarm for damage. |
| Check the swingarm bearing for play | Every 20 operating hours | Moderate | Check swingarm bearing play. |
| Check the heim joint for play | Every 20 operating hours | Moderate | Check shock heim joint play. |
| Check the shock absorber linkage | Every 20 operating hours | Moderate | Check shock linkage. |
| Check the wheel bearing for play | Every 20 operating hours | Moderate | Check wheel bearing play. |
| Check the wheel hubs | Every 20 operating hours | Easy | Check wheel hub condition. |
| Check the chain, rear sprocket, engine sprocket, and chain guide | Every 20 operating hours | Easy | Inspect drive chain and sprockets. |
| Grease all moving parts and check for smooth operation | Every 20 operating hours | Easy | Grease side stand, hand lever, chain, etc. |
| Check/correct the fluid level of the hydraulic clutch | Every 20 operating hours | Easy | Check hydraulic clutch fluid level. |
| Check the front brake fluid level | Every 20 operating hours | Easy | Check front brake fluid level. |
| Check the free travel of the hand brake lever | Every 20 operating hours | Easy | Check front brake lever free play. |
| Change the spark plug and spark plug connector | Every 40 operating hours | Easy | Replace spark plug and connector. |
| Check the reed valve housing, reed valve, and intake flange | Every 20 operating hours | Moderate | Inspect reed valve assembly and intake flange. |
| Check the cables for damage and for routing without kinks | Every 20 operating hours | Easy | Inspect control cables. |
| Clean the air filter and air filter box | Every 20 operating hours | Easy | Clean air filter element and airbox. |
| Change glass fiber yarn filling in the main silencer | Every 20 operating hours | Moderate | Repack main silencer glass-fiber baffling. |
| Service the fork | Every 40 operating hours | Advanced | Full fork service (required-work base interval). |
| Service the shock absorber | Every 40 operating hours | Advanced | Full shock absorber service (required-work base interval). |
| Check the fuel pressure | Every 20 operating hours | Moderate | Check TPI fuel delivery pressure. |
| Check the headlight setting | Every 20 operating hours | Easy | Check/adjust headlight aim. |
| Check idle | Every 20 operating hours | Easy | Check idle speed. |
| Change the front brake fluid | Every 12 months | Moderate | Replace front brake fluid. |
| Change the rear brake fluid | Every 12 months | Moderate | Replace rear brake fluid. |
| Change the hydraulic clutch fluid | Every 12 months | Moderate | Replace hydraulic clutch fluid. |
| Grease the steering head bearing | Every 12 months | Moderate | Grease steering head bearing. |
| Clean the pressure sensor hose | Every 12 months · Every 80 operating hours | Easy | Clean the atmospheric pressure sensor hose. |
| Service the fork (recommended, initial) | See notes | Advanced | One-time initial competition fork service. |
| Service the shock absorber (recommended, initial) | See notes | Advanced | One-time initial competition shock service. |
| Check the electric starter drive | Every 80 operating hours | Moderate | Inspect electric starter drive mechanism. |
| Change the fuel filter | Every 80 operating hours | Easy | Replace fuel filter. |
| Replace the oil pump | Every 80 operating hours | Moderate | Replace the TPI autolube oil injection pump. |
| Perform minor engine service | Every 40 operating hours | Moderate | Check power valve/exhaust control function and smooth operation; check clutch. |
| Perform major engine service | Every 80 operating hours | Expert | Remove/install engine; change connecting rod, conrod bearing and crank pin; clean pressure sensor cylinder connection; check transmission/shift mechanism; change all engine bearings. |
| Check the rear brake fluid level | Every 20 operating hours | Easy | Check rear brake fluid reservoir level. |
| Check the free travel of the foot brake lever | Every 20 operating hours | Easy | Check rear brake pedal free play. |
| Check the spoke tension | Every 20 operating hours | Easy | Check/adjust spoke tension. |
| Change the piston and check the cylinder | Every 80 operating hours | Advanced | Replace piston/rings, inspect cylinder bore. |
| Check that the electrical system is functioning properly | Every 20 operating hours | Easy | Check electrical system operation. |
| Check the tire condition | Every 20 operating hours | Easy | Inspect tire tread/casing. |
| Check the tire air pressure | Every 20 operating hours | Easy | Check/adjust tire pressure. |
| Check the rim run-out | Every 20 operating hours | Moderate | Check wheel rim trueness. |
| Check the chain tension | Every 20 operating hours | Easy | Check/adjust chain tension. |
| Check the play of the steering head bearing | Every 20 operating hours | Moderate | Check steering head bearing play. |
| Change the gear oil | Every 40 operating hours | Moderate | Change transmission gear oil. |
| Check all hoses and sleeves for cracking, leaks, and incorrect routing | Every 20 operating hours | Easy | Inspect fuel, cooling, bleeder, and drainage hoses. |
| Check the antifreeze and coolant level | Every 20 operating hours | Easy | Check coolant level. |
| Check that the throttle cables are undamaged, routed without sharp bends, and set correctly | Every 20 operating hours | Easy | Inspect throttle cable routing/adjustment. |
| Check the screws and nuts for tightness | Every 20 operating hours | Easy | Check fastener tightness. |
| Change the fuel screen | Every 20 operating hours | Easy | Replace in-tank fuel screen/strainer. |
| Final check: check the vehicle for operating safety and take a test ride | Every 20 operating hours | Easy | Road test and final safety check. |
| Read out the fault memory after the test ride | Every 20 operating hours | Easy | Re-check ECU fault memory post-test-ride. |
| Make the service entry in the Husqvarna Motorcycles Dealer.net and in the Service and Warranty Booklet | Every 20 operating hours | Easy | Log service in dealer system and booklet. |
No maintenance items match your search.
Easy: basic tools, straightforward Easy–Moderate: varies by task — somewhere between the two Moderate: some mechanical know-how helps Advanced: specialized tools/skill, still DIY-doable Expert: significant experience required Professional: dealer or shop recommended
What's due?
Enter your current mileage (km) to see what's coming up.
Related bikes
Spot something wrong?
Tell us what needs fixing on the 2018 Husqvarna TE 300i schedule above.