KTM RC 8C 2022 Maintenance Schedule
The 2022 KTM RC 8C maintenance schedule below covers the manufacturer's recommended service intervals for general maintenance, oil, tires, brake fluid, drive chain maintenance, coolant, air filter and valve clearance. Intervals are shown in kilometres by default and can be switched to miles.
889ccEngine size
48Maintenance items
Official manufacturer manual
Sourced from KTM Official Owner's Manual (manufacturer-hosted PDF, azureedge.net CDN) (this document covers model years 2021–2024): azwecdnepstoragewebsiteuploads.azureedge.net
Full schedule
| Task | Interval | Difficulty | Notes |
|---|---|---|---|
| Read out the fault memory using the KTM diagnostics tool | Every 5 operating hours | Easy | Read out the fault memory using the KTM diagnostics tool. |
| Program the shift shaft sensor | Every 12 months · Every 10 operating hours | Moderate | Program the shift shaft sensor. |
| Change the engine oil and the oil filter, clean the oil screens | Every 5 operating hours | Moderate | Change the engine oil and the oil filter, clean the oil screens. |
| Check the brake discs | Every 5 operating hours | Easy | Check the brake discs. |
| Check the front brake linings | Every 5 operating hours | Easy | Check the front brake linings. |
| Check the rear brake linings | Every 5 operating hours | Easy | Check the rear brake linings. |
| Check the fork bearing for play | Every 10 operating hours | Moderate | Check the fork bearing for play. |
| Check the heim joint for play | Every 10 operating hours | Moderate | Check the heim joint (rod-end bearing) for play. |
| Check the shock absorber linkage | Every 10 operating hours | Moderate | Check the shock absorber linkage. |
| Check the tire condition | Every 5 operating hours | Easy | Check the tire condition. |
| Check tire pressure | Every 5 operating hours | Easy | Check tire pressure. |
| Check the brake lines for damage and tightness | Every 5 operating hours | Easy | Check the brake lines for damage and tightness. |
| Check the front brake fluid level | Every 5 operating hours | Easy | Check the front brake fluid level. |
| Check the rear brake fluid level | Every 5 operating hours | Easy | Check the rear brake fluid level. |
| Check brake pressure on the front and back lever | Every 5 operating hours | Easy | Check the brake pressure on the front and back on the lever. |
| Check the free travel of the clutch lever | Every 5 operating hours | Easy | Check the free travel of the clutch lever. |
| Clean the dust boots of the fork legs | Every 15 operating hours | Easy | Clean the dust boots of the fork legs. |
| Check the chain, rear sprocket, and engine sprocket | Every 5 operating hours | Easy | Check the chain, rear sprocket, and engine sprocket. |
| Check the chain tension | Every 5 operating hours | Easy | Check the chain tension. |
| Check the coolant level | Every 5 operating hours | Easy | Check the coolant level. |
| Clean the air filter box | Every 5 operating hours | Easy | Clean the air filter box. |
| Clean the air filter and change as necessary | Every 15 operating hours | Easy | Clean the air filter and change as necessary. |
| Check that the throttle cables are undamaged, routed and set correctly | Every 10 operating hours | Easy | Check that the throttle cables are undamaged, routed without kinks, and set correctly. |
| Check the cables for damage and routing without kinks | Every 10 operating hours | Easy | Check the cables for damage and for routing without kinks. |
| Check the valve clearance | Every 15 operating hours | Advanced | Check the valve clearance. |
| Check the clutch | Every 10 operating hours | Moderate | Check the clutch. |
| Change the cover seal and radial shaft seal rings of the water pump | Every 50 operating hours · Replace every 50 km | Advanced | Change the cover seal and radial shaft seal rings of the water pump. |
| Change the glass fiber yarn filling of the main silencer | Every 15 operating hours · Replace every 15 km | Moderate | Change the glass fiber yarn filling of the main silencer (exhaust packing). |
| Service the fork | Every 12 months · Every 30 operating hours · Replace every 30 km | Advanced | Service the fork. |
| Perform the shock absorber service | Every 12 months · Every 30 operating hours · Replace every 30 km | Advanced | Perform the shock absorber service. |
| Check the fuel pressure | Every 12 months · Every 30 operating hours | Easy | Check the fuel pressure. |
| Change the front brake fluid | Every 10 operating hours · Replace every 10 km | Moderate | Change the front brake fluid. |
| Change the rear brake fluid | Every 10 operating hours · Replace every 10 km | Moderate | Change the rear brake fluid. |
| Check the steering head bearing for play | Every 5 operating hours | Moderate | Check the steering head bearing for play. |
| Check the fuel collecting container | Every 5 operating hours | Easy | Check the fuel collecting container. |
| Check the coolant overflow reservoir | Every 5 operating hours | Easy | Check the coolant overflow reservoir. |
| Check the frame | Every 5 operating hours | Moderate | Check the frame. |
| Check the link fork | Every 5 operating hours | Moderate | Check the link fork. |
| Check the wheel bearing for play | Every 5 operating hours | Moderate | Check the wheel bearing for play. |
| Check easily accessible safety-relevant screws and nuts for tightness | Every 5 operating hours | Moderate | Check the easily accessible, safety-relevant screws and nuts (e.g. front wheel spindle, rear wheel spindle, swingarm pivot) for tightness. |
| Grease all moving parts (hand lever, chain, etc.) | Every 12 months · Every 5 operating hours | Easy | Grease all moving parts (e.g. hand lever, chain) and check for smooth operation. |
| Check all hoses for cracking, tightness and routing | Every 5 operating hours | Easy | Check all hoses (e.g. fuel, cooling, bleeder, drainage hoses, etc.) and sleeves for cracking, tightness, and correct routing. |
| Change the fuel filter | Every 30 operating hours · Replace every 30 km | Moderate | Change the fuel filter. |
| Perform minor engine service (spark plugs, piston, cylinder, cylinder head, cam, clutch facings) | Every 50 operating hours | Professional | Perform minor engine service including removing and installing the engine: change the spark plugs; check/measure the piston; check/measure the cylinder and check the cylinder head; change the cylinder head gasket; check the camshaft and cam lever; check the timing assembly; change the clutch facings. |
| Perform major engine service (valves, conrod, piston, transmission, timing chain) | Every 50 operating hours · Replace every 50 km | Professional | Perform major engine service including removing and installing the engine: change the valves, valve springs, valve spring seats, valve spring retainer, and cam lever; change the connecting rod, conrod bearing and balancer shaft bearing; change the piston; check the transmission and shift mechanism; change the cylinder head gasket; check the oil pressure control valve; change the oil pumps and check the lubrication system; change the timing chain, tensioning rail and guide rail. |
| Final check: operating safety and test ride | Every 5 operating hours | Easy | Final check: check the vehicle for operating safety and take it for a test ride. |
| Read out the fault memory after the test ride using the KTM diagnostics tool | Every 5 operating hours | Easy | Read out the fault memory after the test ride using the KTM diagnostics tool. |
| Make a service entry in KTM Dealer.net | Every 5 operating hours | Easy | Make a service entry in KTM Dealer.net. |
No maintenance items match your search.
Easy: basic tools, straightforward Easy–Moderate: varies by task — somewhere between the two Moderate: some mechanical know-how helps Advanced: specialized tools/skill, still DIY-doable Expert: significant experience required Professional: dealer or shop recommended
What's due?
Enter your current mileage (km) to see what's coming up.
Related bikes
Spot something wrong?
Tell us what needs fixing on the 2022 KTM RC 8C schedule above.