Moto Guzzi V7 II 2015 Maintenance Schedule
The 2015 Moto Guzzi V7 II maintenance schedule below covers the manufacturer's recommended service intervals for general maintenance, air filter, oil, brake fluid, tires, battery, drive chain maintenance, valve clearance and spark plugs. Intervals are shown in kilometres by default and can be switched to miles.
744ccEngine size
32Maintenance items
Official manufacturer manual
Sourced from Moto Guzzi V7 II ABS Service Station Manual 2Q000105, Scheduled maintenance table / ROUTINE MAINTENANCE TABLE (MAIN p.48-49) (this document covers model years 2015–2016): cadrecycle.com
Full schedule
| Task | Interval | Difficulty | Notes |
|---|---|---|---|
| Transmission cables and controls inspection | Every 10,000 km (first at 1,000 km) | Easy | Inspect, adjust and lubricate throttle, clutch and other control cables. |
| Steering bearings and steering clearance check | Every 10,000 km (first at 1,000 km) | Moderate | Check steering head bearing play and adjust if necessary. |
| Wheel bearings inspection | Every 10,000 km | Moderate | Inspect front and rear wheel bearings for play/wear. |
| Diagnosis by diagnostic tool | Every 10,000 km (first at 1,000 km) | Moderate | Check for stored fault codes and correct sensor parameters using the dealer diagnostic tool. |
| Brake discs inspection | Every 10,000 km (first at 1,000 km) | Easy | Inspect front and rear brake discs for wear/damage. |
| Air filter replacement | Every 10,000 km | Easy | Replace air filter element. |
| Oil screen filter cleaning | Every 59,000 km (first at 1,000 km) | Moderate | Clean the secondary engine oil screen/mesh filter (separate from the paper cartridge filter). |
| Lights operation and aiming check | Every 10,000 km | Easy | Check headlight/taillight/indicator operation and headlight beam aiming. |
| Vehicle general operation check | Every 10,000 km (first at 1,000 km) | Easy | General check of overall vehicle operation. |
| Braking systems check | Every 10,000 km (first at 1,000 km) | Easy | Check operation of front and rear braking systems. |
| Light circuit check | Every 10,000 km (first at 1,000 km) | Easy | Check the lighting electrical circuit. |
| Safety switches check | Every 10,000 km (first at 1,000 km) | Easy | Check side stand, clutch and brake lever safety switch operation. |
| Brake fluid level and condition check | Every 10,000 km (first at 1,000 km) | Easy | Check front and rear brake fluid reservoir level and condition. |
| Fork oil replacement | Every 40,000 km · Every 48 months | Advanced | Replace front fork oil. |
| Fork oil seal visual check | Every 10,000 km (first at 1,000 km) | Easy | Visually check front fork oil seals for leaks. |
| Tyres pressure and wear check | Every 10,000 km (first at 1,000 km) | Easy | Check tyre pressure, tread wear and general condition. |
| Wheels inspection | Every 10,000 km (first at 1,000 km) | Easy | Inspect wheel rims and spokes/condition. |
| Bolts and nuts tightening check | Every 10,000 km (first at 1,000 km) | Moderate | Check tightness of chassis and engine mounting bolts and nuts. |
| Battery terminals tightening check | See notes | Easy | Check tightness of battery terminal connections. |
| Cylinder head bolt tightening check | See notes | Moderate | Re-torque cylinder head bolts after initial break-in. |
| Suspension setting check | Every 20,000 km (first at 1,000 km) | Moderate | Check front/rear suspension setting and general condition. |
| Filter box drain plug cleaning | Every 10,000 km (first at 1,000 km) | Easy | Clean the airbox drain plug. |
| Fuel lines inspection | Every 10,000 km | Easy | Visually inspect fuel lines for cracking, chafing or leaks. |
| Brake pipes inspection | Every 10,000 km | Easy | Visually inspect brake hydraulic pipes/lines for cracking, chafing or leaks. |
| Clutch wear inspection | Every 10,000 km | Moderate | Inspect clutch wear. |
| Brake pad wear check | Every 10,000 km (first at 1,000 km) | Easy | Check front and rear brake pad wear; replace if necessary. |
| Final drive bevel gear oil replacement | Every 20,000 km (first at 1,000 km) | Easy | Drain and replace final drive shaft bevel gear oil. |
| Brake fluid replacement | Every 20,000 km · Every 24 months · Replace every 20,000 km · Replace every 24 months | Moderate | Replace front and rear hydraulic brake fluid. |
| Engine oil and filter replacement | Every 10,000 km (first at 1,000 km) · Every 12 months | Easy | Replace engine oil and replace oil filter element. |
| Gearbox oil replacement | Every 60,000 km (first at 1,000 km) | Easy | Drain and refill gearbox transmission oil. |
| Valve clearance inspection and adjustment | Every 10,000 km (first at 1,000 km) · Every 12 months | Advanced | Check and adjust intake and exhaust valve clearances on cold engine. |
| Spark plugs replacement | Every 10,000 km · Replace every 10,000 km | Easy | Replace spark plugs. |
No maintenance items match your search.
Easy: basic tools, straightforward Easy–Moderate: varies by task — somewhere between the two Moderate: some mechanical know-how helps Advanced: specialized tools/skill, still DIY-doable Expert: significant experience required Professional: dealer or shop recommended
What's due?
Enter your current mileage (km) to see what's coming up.
Related bikes
Spot something wrong?
Tell us what needs fixing on the 2015 Moto Guzzi V7 II schedule above.