Yamaha MT-10 SP 2024 Maintenance Schedule
The 2024 Yamaha MT-10 SP maintenance schedule below covers the manufacturer's recommended service intervals for general maintenance, spark plugs, valve clearance, coolant, air filter, brake fluid, tires, drive chain maintenance and oil. Intervals are shown in kilometres by default and can be switched to miles.
998ccEngine size
44Maintenance items
Official manufacturer manual
Sourced from Yamaha MT-10 SP Owner's Manual (BGG-28199-E0) (this document covers model years 2022–2025): manuals.co.uk
Full schedule
| Task | Interval | Difficulty | Notes |
|---|---|---|---|
| Fuel line - check for cracks or damage | Every 10,000 km (first at 10,000 km) · Every 12 months | Advanced | Check fuel hoses for cracks or damage; replace if necessary. |
| Spark plugs - check condition, gap and clean | Every 20,000 km (first at 10,000 km) | Advanced | Check condition; adjust gap and clean. |
| Spark plugs - replace | Every 20,000 km (first at 20,000 km) · Replace every 20,000 km | Advanced | Replace spark plug. |
| Valve clearance - check and adjust | Every 40,000 km (first at 40,000 km) | Expert | Check and adjust valve clearance. |
| Fuel injection - check idle speed and adjust synchronization | Every 10,000 km (first at 10,000 km) · Every 12 months | Advanced | Check engine idle speed; check and adjust synchronization. |
| Exhaust system - check leakage, tighten and check gaskets | Every 10,000 km (first at 1,000 km) | Advanced | Check for leakage; tighten if necessary; replace gaskets if necessary. |
| Evaporative emission control system - check (California only) | Every 20,000 km (first at 20,000 km) | Advanced | Check control system for damage; replace if necessary. |
| Cooling system - change coolant | Every 36 months · Replace every 36 months | Easy–Moderate | Change coolant. |
| Air induction system - check and replace damaged parts | Every 10,000 km (first at 10,000 km) · Every 12 months | Advanced | Check the air cut-off valve, reed valve, and hose for damage; replace any damaged parts if necessary. |
| Diagnostic system check - dynamic inspection and error code check | Every 10,000 km (first at 1,000 km) · Every 12 months | Expert | Perform dynamic inspection using Yamaha diagnostic tool; check the error codes. |
| Air filter element - replace | Every 40,000 km (first at 40,000 km) · Replace every 40,000 km | Advanced | Replace air filter element. |
| Clutch - check operation and adjust | Every 10,000 km (first at 1,000 km) | Easy–Moderate | Check operation; adjust. |
| Front brake - check operation, fluid level and leakage | Every 10,000 km (first at 1,000 km) · Every 12 months | Advanced | Check operation, fluid level, and for fluid leakage; adjust brake lever free play; replace brake pads if necessary. |
| Rear brake - check operation, fluid level and leakage | Every 10,000 km (first at 1,000 km) · Every 12 months | Advanced | Check operation, fluid level, and for fluid leakage; replace brake pads if necessary. |
| Brake hoses - check for cracks or damage | Every 10,000 km (first at 10,000 km) | Advanced | Check for cracks or damage. |
| Brake hoses - replace | Every 48 months · Replace every 48 months | Advanced | Replace brake hoses. |
| Brake fluid - change | Every 24 months · Replace every 24 months | Advanced | Change brake fluid. |
| Wheels - check runout and for damage | Every 10,000 km (first at 10,000 km) | Advanced | Check runout and for damage; replace if necessary. |
| Tires - check tread depth, air pressure and for damage | Every 10,000 km (first at 10,000 km) · Every 12 months | Advanced | Check tread depth and for damage; replace if necessary; check air pressure; correct if necessary. |
| Wheel bearings - check for looseness or damage | Every 10,000 km (first at 10,000 km) | Advanced | Check bearing for looseness or damage. |
| Swingarm pivot bearings - check operation and play | Every 10,000 km (first at 10,000 km) | Advanced | Check operation and for excessive play. |
| Swingarm pivot bearings - lubricate | Every 50,000 km (first at 50,000 km) | Advanced | Lubricate with lithium-soap-based grease. |
| Drive chain - check, adjust and lubricate | Every 1,000 km (first at 1,000 km) | Easy | Check chain slack, alignment and condition; adjust and lubricate chain with a special O-ring chain lubricant thoroughly. |
| Steering bearings - check for looseness | See notes | Advanced | Check bearing assemblies for looseness. |
| Steering bearings - repack | See notes | Advanced | Moderately repack with lithium-soap-based grease. |
| Steering damper - check operation and oil leakage | Every 10,000 km (first at 10,000 km) | Advanced | Check operation and for oil leakage. |
| Chassis fasteners - check tightness | Every 10,000 km (first at 10,000 km) · Every 12 months | Advanced | Make sure that all nuts, bolts and screws are properly tightened. |
| Brake lever pivot shaft - lubricate | Every 10,000 km (first at 10,000 km) · Every 12 months | Advanced | Lubricate with silicone grease. |
| Brake pedal pivot shaft - lubricate | Every 10,000 km (first at 10,000 km) · Every 12 months | Easy | Lubricate with lithium-soap-based grease. |
| Clutch lever pivot shaft - lubricate | Every 10,000 km (first at 10,000 km) · Every 12 months | Easy | Lubricate with lithium-soap-based grease. |
| Shift pedal pivot shaft - lubricate | Every 10,000 km (first at 10,000 km) · Every 12 months | Easy | Lubricate with molybdenum disulfide grease. |
| Sidestand - check operation and lubricate | Every 10,000 km (first at 10,000 km) · Every 12 months | Easy | Check operation; lubricate with lithium-soap-based grease. |
| Sidestand switch - check operation | Every 10,000 km (first at 1,000 km) · Every 12 months | Advanced | Check operation and replace if necessary. |
| Front fork - check operation and oil leakage | Every 10,000 km (first at 10,000 km) | Advanced | Check operation and for oil leakage; replace if necessary. |
| Shock absorber assembly - check operation and oil leakage | Every 10,000 km (first at 10,000 km) | Advanced | Check operation and for oil leakage; replace if necessary. |
| Rear suspension relay arm and connecting arm pivoting points - check operation | Every 10,000 km (first at 10,000 km) | Advanced | Check operation. |
| Engine oil - change | Every 10,000 km (first at 1,000 km) · Every 12 months | Advanced | Change engine oil (warm engine before draining); check oil level and vehicle for oil leakage. |
| Engine oil filter cartridge - replace | Every 20,000 km (first at 1,000 km) · Replace every 20,000 km | Advanced | Replace oil filter cartridge. |
| Cooling system - check coolant level and leakage | Every 10,000 km (first at 10,000 km) | Advanced | Check coolant level and vehicle for coolant leakage. |
| EXUP system - check operation, cable free play and pulley position | See notes | Advanced | Check operation, cable free play and pulley position. |
| Front and rear brake switches - check operation | Every 10,000 km (first at 1,000 km) | Advanced | Check operation. |
| Moving parts and cables - lubricate | Every 10,000 km (first at 10,000 km) | Advanced | Lubricate. |
| Throttle grip - check operation and lubricate | Every 10,000 km (first at 10,000 km) · Every 12 months | Advanced | Check operation; lubricate throttle grip housing tube guides. |
| Lights, signals and switches - check operation and adjust headlight | Every 10,000 km (first at 1,000 km) · Every 12 months | Advanced | Check operation; adjust headlight beam. |
No maintenance items match your search.
Easy: basic tools, straightforward Easy–Moderate: varies by task — somewhere between the two Moderate: some mechanical know-how helps Advanced: specialized tools/skill, still DIY-doable Expert: significant experience required Professional: dealer or shop recommended
What's due?
Enter your current mileage (km) to see what's coming up.
Related bikes
Spot something wrong?
Tell us what needs fixing on the 2024 Yamaha MT-10 SP schedule above.