Yamaha YZF-R1 2013 Maintenance Schedule
The 2013 Yamaha YZF-R1 maintenance schedule below covers the manufacturer's recommended service intervals for general maintenance, spark plugs, valve clearance, air filter, brake fluid, tires, drive chain maintenance, oil and coolant. Intervals are shown in kilometres by default and can be switched to miles.
998ccEngine size
36Maintenance items
Official manufacturer manual
Sourced from Yamaha YZF-R1 2013 Owner's Manual (this document covers model years 2012–2014): manualslib.com
Full schedule
| Task | Interval | Difficulty | Notes |
|---|---|---|---|
| Fuel Line Inspection | Every 4,000 mi · Every 6 months | Advanced | Check fuel hoses for cracks or damage; replace if necessary. |
| Spark Plugs | Every 4,000 mi · Every 6 months · Replace every 8,000 mi · Replace every 12 months | Advanced | Check condition, adjust gap and clean; replace at the listed replace interval. |
| Valve Clearance Inspection | Every 26,600 mi | Advanced | Check and adjust valve clearance when the engine is cold. |
| Crankcase Breather System Inspection | Every 4,000 mi · Every 6 months | Advanced | Check breather hose for cracks or damage; replace if necessary. |
| Fuel Injection Synchronization | Every 4,000 mi (first at 600 mi) · Every 6 months | Advanced | Adjust fuel-injection synchronization. |
| Exhaust System Inspection | Every 4,000 mi · Every 6 months | Advanced | Check for leakage; tighten if necessary; replace gasket(s) if necessary. |
| Evaporative Emission Control System Inspection | Every 8,000 mi (first at 12,000 mi) · Every 12 months | Advanced | Check the evaporative emission control system for damage; replace if necessary (California-model only). |
| Air Induction System Inspection | Every 8,000 mi (first at 12,000 mi) · Every 12 months | Advanced | Check the air cut-off valve, reed valve, and hose for damage; replace any damaged parts if necessary. |
| Air Filter Element Replacement | Replace every 24,000 mi | Easy | Replace the air filter element. |
| Clutch Adjustment and Inspection | Every 4,000 mi (first at 600 mi) · Every 6 months | Moderate | Check operation; adjust or replace clutch cable. |
| Front Brake Inspection | Every 4,000 mi (first at 600 mi) · Every 6 months | Advanced | Check operation, fluid level, and for fluid leakage; replace brake pads if necessary. |
| Rear Brake Inspection | Every 4,000 mi (first at 600 mi) · Every 6 months | Advanced | Check operation, fluid level, and for fluid leakage; replace brake pads if necessary. |
| Brake Hoses Inspection | Every 4,000 mi · Every 6 months · Replace every 48 months | Advanced | Check for correct routing and clamping, and for cracks or damage. |
| Brake Fluid Replacement | Replace every 24 months | Moderate | Replace brake fluid. |
| Wheel Inspection | Every 4,000 mi · Every 6 months | Advanced | Check wheel runout and for damage; replace if necessary. |
| Tire Inspection | Every 4,000 mi · Every 6 months | Moderate | Check tread depth and for damage, replace if necessary; check air pressure and correct if necessary. |
| Wheel Bearing Inspection | Every 4,000 mi · Every 6 months | Advanced | Check bearings for smooth operation; replace if necessary. |
| Swingarm Pivot Bearings Inspection and Lubrication | Every 4,000 mi · Every 6 months · Replace every 32,000 mi | Advanced | Check operation and for excessive play; moderately repack with lithium-soap-based grease at the listed interval. |
| Drive Chain Adjustment and Lubrication | Every 500 mi | Easy | Check chain slack, alignment and condition; adjust and lubricate the chain thoroughly with a special O-ring chain lubricant. |
| Steering Bearings Inspection and Lubrication | Every 4,000 mi (first at 600 mi) · Every 6 months · Replace every 16,000 mi | Advanced | Check bearing assemblies for looseness; moderately repack with lithium-soap-based grease at the listed interval. |
| Steering Damper Inspection | Every 4,000 mi · Every 6 months | Advanced | Check operation and for oil leakage. |
| Chassis Fasteners Inspection | Every 4,000 mi · Every 6 months | Moderate | Check all chassis fittings and fasteners; correct if necessary. |
| Brake Lever Pivot Shaft Lubrication | Every 4,000 mi · Every 6 months | Easy | Apply silicone grease lightly to the brake lever pivot shaft. |
| Brake Pedal Pivot Shaft Lubrication | Every 4,000 mi · Every 6 months | Easy | Apply lithium-soap-based grease lightly to the brake pedal pivot shaft. |
| Clutch Lever Pivot Shaft Lubrication | Every 4,000 mi · Every 6 months | Easy | Apply lithium-soap-based grease lightly to the clutch lever pivot shaft. |
| Shift Pedal Pivot Shaft Lubrication | Every 4,000 mi · Every 6 months | Easy | Apply lithium-soap-based grease lightly to the shift pedal pivot shaft. |
| Sidestand Pivot Lubrication | Every 4,000 mi · Every 6 months | Easy | Check operation; apply lithium-soap-based grease lightly. |
| Sidestand Switch Inspection | Every 4,000 mi (first at 600 mi) · Every 6 months | Advanced | Check operation and replace if necessary. |
| Front Fork Inspection | Every 4,000 mi · Every 6 months | Advanced | Check operation and for oil leakage; replace if necessary. |
| Shock Absorber Assembly Inspection | Every 4,000 mi · Every 6 months | Advanced | Check operation and for oil leakage; replace if necessary. |
| Rear Suspension Link Pivots Inspection | Every 8,000 mi · Every 12 months | Advanced | Check operation; correct if necessary. |
| Engine Oil Change | Every 4,000 mi (first at 600 mi) · Every 6 months | Easy | Change engine oil (warm engine before draining). |
| Engine Oil Filter Cartridge Replacement | Replace every 8,000 mi · Replace every 12 months | Easy | Replace the engine oil filter cartridge. |
| Cooling System Inspection and Coolant Change | Every 4,000 mi · Every 6 months · Replace every 16,000 mi · Replace every 24 months | Easy–Moderate | Check hoses for cracks or damage, replace if necessary; change coolant. |
| Front and Rear Brake Switches Inspection | Every 4,000 mi (first at 600 mi) · Every 6 months | Advanced | Check operation of the front and rear brake light switches. |
| Control Cables Lubrication | Every 4,000 mi (first at 600 mi) · Every 6 months | Easy | Apply Yamaha cable lubricant or other suitable cable lubricant thoroughly to control cables. |
No maintenance items match your search.
Easy: basic tools, straightforward Easy–Moderate: varies by task — somewhere between the two Moderate: some mechanical know-how helps Advanced: specialized tools/skill, still DIY-doable Expert: significant experience required Professional: dealer or shop recommended
What's due?
Enter your current mileage (km) to see what's coming up.
Related bikes
Spot something wrong?
Tell us what needs fixing on the 2013 Yamaha YZF-R1 schedule above.