moto.care

Honda VT1300 (Sabre/Interstate/Stateline/Fury) 2010 Wartungsplan

Der folgende Wartungsplan für die Honda VT1300 (Sabre/Interstate/Stateline/Fury) (2010) enthält die vom Hersteller empfohlenen Wartungsintervalle für Ventilspiel, Öl, allgemeine Wartung, Kühlmittel, Bremsflüssigkeit, Reifen, Zündkerzen und Luftfilter. Die Intervalle werden standardmäßig in Kilometern angezeigt und können auf Meilen umgestellt werden.

1312ccHubraum
25Wartungspunkte
Offizielles Herstellerhandbuch

Quelle: American Honda Motor Co. (Owners Manual) (dieses Dokument deckt die Modelljahre 2009–2017 ab): manualslib.com

moto.care

Verpasse nie wieder eine Wartung an deiner VT1300 (Sabre/Interstate/Stateline/Fury).

Trage deinen Kilometerstand einmal ein und erhalte Erinnerungen, bevor etwas aus dieser Liste fällig wird – plus eine vollständige Wartungshistorie für jedes Motorrad, das du besitzt.

Kostenlos starten

Keine Kreditkarte erforderlich. Danach kostenloser Logbook-Plan.

Jedes Intervall auf dieser Seite im Blick
Erinnerungen, bevor etwas fällig wird
Vollständige Wartungshistorie, mit einem Tipp erfasst

Vollständiger Wartungsplan

AufgabeIntervallSchwierigkeitHinweise
Valve Clearance Inspection Alle 8,000 mi (erstmals bei 600 mi) Fortgeschritten Inspect and adjust valve clearance. Initial check at 600 mi (1,000 km), then every 8,000 mi (12,800 km) thereafter (8K/16K/24K).
Engine Oil Change Alle 8,000 mi (erstmals bei 600 mi) · Alle 12 Monate Einfach Replace engine oil. Initial change at 600 mi (1,000 km) or 1 month; regular change every 8,000 mi (12,800 km) or 12 months, whichever comes first. Refer to manual page 84.
Engine Oil Filter Replacement Alle 8,000 mi (erstmals bei 600 mi) Einfach Replace engine oil filter. Initial replacement at 600 mi (shared with the first oil change), then every 8,000 mi (12,800 km) thereafter (0.6K/8K/16K/24K). Refer to manual page 89.
Engine Idle Speed Check Alle 4,000 mi (erstmals bei 600 mi) Einfach–Mittel Inspect and adjust engine idle speed. Initial check at 600 mi, then every 4,000 mi thereafter, charted at every checkpoint (0.6K/4K/8K/12K/16K/20K/24K).
Cooling System Inspection Alle 8,000 mi Einfach–Mittel Inspect cooling system (hoses, radiator, connections) for leaks or damage every 8,000 mi (12,800 km), at the 8K/16K/24K checkpoints.
Brake Fluid Inspection/Replacement Alle 4,000 mi · Ersetzen alle 12,000 mi · Ersetzen alle 24 Monate Mittel Inspect brake fluid level and condition every 4,000 mi (6,400 km) (at the 4K/8K/16K/20K checkpoints); replace brake fluid every 12,000 mi (19,200 km) or 2 years, whichever comes first (at the 12K/24K checkpoints). Refer to manual page 120.
Brake Pads Wear Inspection Alle 4,000 mi Mittel Inspect front and rear brake pads for wear every 4,000 mi (6,400 km), charted at every checkpoint from 4K through 24K. Refer to manual page 123.
Brake System Inspection Alle 8,000 mi (erstmals bei 600 mi) Mittel Inspect overall brake system (lines, hoses, operation) every 8,000 mi (12,800 km); initial check at 600 mi, then at 8K/16K/24K. Refer to manual page 120.
Headlight Aim Inspection Alle 8,000 mi Einfach–Mittel Inspect and adjust headlight aim every 8,000 mi (12,800 km), at the 8K/16K/24K checkpoints.
Side Stand Inspection Alle 8,000 mi Einfach–Mittel Inspect side stand operation and spring every 8,000 mi (12,800 km), at the 8K/16K/24K checkpoints. Refer to manual page 134.
Suspension Inspection Alle 8,000 mi Einfach–Mittel Inspect front and rear suspension operation every 8,000 mi (12,800 km), at the 8K/16K/24K checkpoints.
Nuts, Bolts, and Fasteners Inspection Alle 8,000 mi (erstmals bei 600 mi) Einfach–Mittel Check that all visible nuts, bolts, and fasteners are properly tightened. Initial check at 600 mi, then every 8,000 mi thereafter (8K/16K/24K).
Wheels and Tires Inspection Alle 8,000 mi Mittel Inspect wheels and tires for damage, wear, and proper condition every 8,000 mi (12,800 km), at the 8K/16K/24K checkpoints.
Steering Head Bearings Inspection Alle 8,000 mi (erstmals bei 600 mi) Fortgeschritten Inspect steering head bearings for looseness or roughness. Initial check at 600 mi, then every 8,000 mi thereafter (8K/16K/24K).
Crankcase Breather Cleaning Alle 4,000 mi Einfach Clean the crankcase breather, draining deposits from the transparent section of the drain tube, every 4,000 mi (6,400 km) starting at the 4,000 mi checkpoint (4K/8K/12K/16K/20K/24K). Refer to manual page 100.
Spark Plugs Inspection/Replacement Alle 4,000 mi · Ersetzen alle 8,000 mi Einfach–Mittel Inspect spark plugs every 4,000 mi (6,400 km) (at the 4K/12K/20K checkpoints); replace every 8,000 mi (12,800 km) (at the 8K/16K/24K checkpoints). Refer to manual page 110.
Radiator Coolant Inspection/Replacement Alle 8,000 mi · Ersetzen alle 24,000 mi · Ersetzen alle 24 Monate Einfach–Mittel Inspect coolant level and condition every 8,000 mi (12,800 km) (at the 8K/16K checkpoints); replace coolant every 24,000 mi (38,400 km) or 2 years, whichever comes first (at the 24K checkpoint). Refer to manual page 93.
Secondary Air Supply System Inspection Alle 8,000 mi Mittel Inspect secondary air supply system every 8,000 mi (12,800 km), at the 8K/16K/24K checkpoints.
Evaporative Emission Control System Inspection Alle 12,000 mi Mittel Inspect evaporative emission control system every 12,000 mi (19,200 km), at the 12K/24K checkpoints.
Final Drive Oil Inspection/Replacement Alle 8,000 mi · Ersetzen alle 24,000 mi Mittel Inspect final drive (shaft drive) oil level every 8,000 mi (12,800 km) (at the 8K/16K checkpoints); replace every 24,000 mi (38,400 km) (at the 24K checkpoint). Refer to manual page 101.
Throttle Operation Inspection Alle 8,000 mi Einfach–Mittel Check throttle grip freeplay and confirm smooth operation without binding or sticking every 8,000 mi (12,800 km), checked at the 8K/16K/24K checkpoints.
Fuel Line Inspection Alle 8,000 mi Mittel Inspect fuel line and connections for leaks, cracks, or deterioration every 8,000 mi (12,800 km), checked at the 8K/16K/24K checkpoints.
Air Cleaner Element Replacement Alle 12,000 mi Einfach Replace the air cleaner (air filter) element every 12,000 mi (19,200 km), at the 12K/24K checkpoints. Refer to manual page 98.
Brake Light Switch Inspection Alle 8,000 mi Einfach–Mittel Inspect front and rear brake light switch operation every 8,000 mi (12,800 km), at the 8K/16K/24K checkpoints.
Clutch System Inspection Alle 4,000 mi (erstmals bei 600 mi) Einfach–Mittel Inspect clutch lever freeplay and operation. Initial check at 600 mi, then every 4,000 mi thereafter, charted at every checkpoint (0.6K through 24K). Refer to manual page 106.

Keine Wartungspunkte gefunden, die zu deiner Suche passen.

Einfach: einfache Werkzeuge, unkompliziert Einfach–Mittel: je nach Aufgabe unterschiedlich – irgendwo dazwischen Mittel: etwas technisches Verständnis hilft Fortgeschritten: spezielles Werkzeug/Können nötig, aber noch selbst machbar Experte: deutliche Erfahrung erforderlich Profi: Werkstatt oder Vertragshändler empfohlen

Was steht an?

Gib deinen aktuellen Kilometerstand (km) ein, um zu sehen, was ansteht.

Ähnliche Motorräder

Etwas falsch entdeckt?

Sag uns, was am obigen Wartungsplan für die Honda VT1300 (Sabre/Interstate/Stateline/Fury) (2010) korrigiert werden muss.

Keine Datei ausgewählt