Honda VT1300 (Sabre/Interstate/Stateline/Fury) 2023 Wartungsplan
Der folgende Wartungsplan für die Honda VT1300 (Sabre/Interstate/Stateline/Fury) (2023) enthält die vom Hersteller empfohlenen Wartungsintervalle für allgemeine Wartung, Öl, Kühlmittel, Bremsflüssigkeit, Reifen, Luftfilter, Zündkerzen und Ventilspiel. Die Intervalle werden standardmäßig in Kilometern angezeigt und können auf Meilen umgestellt werden.
1312ccHubraum
25Wartungspunkte
Offizielles Herstellerhandbuch
Quelle: American Honda Motor Co. (Owners Manual) (dieses Dokument deckt die Modelljahre 2018–2026 ab): hondamotopub.com
Vollständiger Wartungsplan
| Aufgabe | Intervall | Schwierigkeit | Hinweise |
|---|---|---|---|
| Throttle Operation Inspection | Alle 8,000 mi | Einfach–Mittel | Check throttle grip freeplay and confirm smooth operation without binding or sticking every 8,000 mi. Refer to manual page 84. |
| Engine Oil Change | Alle 8,000 mi (erstmals bei 600 mi) · Alle 12 Monate | Einfach | Replace engine oil. Initial change at 600 mi (1,000 km) or 1 month; regular change every 8,000 mi (12,800 km) or 12 months, whichever comes first. Refer to manual page 70. |
| Engine Oil Filter Replacement | Alle 8,000 mi (erstmals bei 600 mi) | Einfach | Replace engine oil filter. Initial replacement at 600 mi (shared with the first oil change), then every 8,000 mi thereafter. Refer to manual page 70. |
| Engine Idle Speed Check | Alle 4,000 mi | Einfach–Mittel | Inspect and adjust engine idle speed. Charted at every 4,000-mile checkpoint (0.6K, 4K, 8K, 12K, 16K, 20K, 24K). |
| Radiator Coolant Inspection/Replacement | Alle 8,000 mi · Ersetzen alle 24,000 mi · Ersetzen alle 24 Monate | Einfach–Mittel | Inspect coolant level and condition every 8,000 mi; replace coolant every 24,000 mi or 2 years, whichever comes first. Refer to manual page 73. |
| Cooling System Inspection | Alle 8,000 mi | Einfach–Mittel | Inspect cooling system (hoses, radiator, connections) for leaks or damage every 8,000 mi. |
| Evaporative Emission Control System Inspection | Alle 12,000 mi | Mittel | Inspect evaporative emission control system every 12,000 mi. |
| Final Drive Oil Inspection/Replacement | Alle 8,000 mi · Ersetzen alle 24,000 mi | Mittel | Inspect final drive (shaft drive) oil level every 8,000 mi; replace every 24,000 mi. Refer to manual page 75. |
| Brake Fluid Inspection/Replacement | Alle 4,000 mi · Ersetzen alle 12,000 mi · Ersetzen alle 24 Monate | Mittel | Inspect brake fluid level and condition every 4,000 mi; replace every 12,000 mi or 2 years, whichever comes first. Refer to manual page 77. |
| Brake Pads Wear Inspection | Alle 4,000 mi | Einfach–Mittel | Inspect front and rear brake pads for wear every 4,000 mi. Refer to manual page 78. |
| Brake System Inspection | Alle 8,000 mi (erstmals bei 600 mi) | Mittel | Inspect brake system (lines, lever and pedal operation). Initial check at 600 mi, then every 8,000 mi. Refer to manual page 77. |
| Brake Light Switch Inspection | Alle 8,000 mi | Einfach | Inspect brake light switch operation every 8,000 mi. Refer to manual page 79. |
| Headlight Aim Inspection | Alle 8,000 mi | Einfach–Mittel | Check and adjust headlight aim every 8,000 mi. Refer to manual page 86. |
| Clutch System Inspection | Alle 4,000 mi | Einfach–Mittel | Inspect clutch system operation and lever freeplay every 4,000 mi. Refer to manual page 81. |
| Side Stand Inspection | Alle 8,000 mi | Einfach–Mittel | Inspect side stand operation (spring tension, pivot, ignition cutoff switch) every 8,000 mi. Refer to manual page 80. |
| Suspension Inspection | Alle 8,000 mi | Mittel | Inspect front and rear suspension every 8,000 mi. Refer to manual page 87. |
| Nuts, Bolts, and Fasteners Inspection | Alle 8,000 mi (erstmals bei 600 mi) | Einfach–Mittel | Check and tighten major nuts, bolts, and fasteners. Initial check at 600 mi, then every 8,000 mi. |
| Wheels and Tires Inspection | Alle 8,000 mi | Mittel | Inspect wheels and tires (tread wear, air pressure, damage) every 8,000 mi. Refer to manual page 53. |
| Steering Head Bearings Inspection | Alle 8,000 mi (erstmals bei 600 mi) | Fortgeschritten | Inspect steering head bearings for looseness or roughness. Initial check at 600 mi, then every 8,000 mi. |
| Fuel Line Inspection | Alle 8,000 mi | Mittel | Inspect fuel line and connections for leaks, cracks, or deterioration every 8,000 mi. |
| Air Cleaner Element Replacement | Alle 12,000 mi | Einfach | Replace the air cleaner (air filter) element every 12,000 mi. Refer to manual page 72. |
| Crankcase Breather Cleaning | Alle 4,000 mi | Einfach | Clean the crankcase breather, draining deposits from the transparent section of the drain tube, every 4,000 mi starting at the 4,000 mi checkpoint. Refer to manual page 85. |
| Spark Plugs Inspection/Replacement | Alle 4,000 mi · Ersetzen alle 8,000 mi | Einfach–Mittel | Inspect spark plugs every 4,000 mi (at the 4K/12K/20K odometer checkpoints); replace every 8,000 mi (at the 8K/16K/24K checkpoints). Refer to manual page 64. |
| Valve Clearance Inspection | Alle 8,000 mi (erstmals bei 600 mi) | Fortgeschritten | Inspect and adjust valve clearance. Initial check at 600 mi (1 month), then every 8,000 mi thereafter. |
| Secondary Air Supply System Inspection | Alle 8,000 mi | Mittel | Inspect secondary air supply system every 8,000 mi. |
Keine Wartungspunkte gefunden, die zu deiner Suche passen.
Einfach: einfache Werkzeuge, unkompliziert Einfach–Mittel: je nach Aufgabe unterschiedlich – irgendwo dazwischen Mittel: etwas technisches Verständnis hilft Fortgeschritten: spezielles Werkzeug/Können nötig, aber noch selbst machbar Experte: deutliche Erfahrung erforderlich Profi: Werkstatt oder Vertragshändler empfohlen
Was steht an?
Gib deinen aktuellen Kilometerstand (km) ein, um zu sehen, was ansteht.
Ähnliche Motorräder
Etwas falsch entdeckt?
Sag uns, was am obigen Wartungsplan für die Honda VT1300 (Sabre/Interstate/Stateline/Fury) (2023) korrigiert werden muss.