Honda Integra NC700D 2012 Maintenance Schedule
The 2012 Honda Integra NC700D maintenance schedule below covers the manufacturer's recommended service intervals for general maintenance, spark plugs, air filter, valve clearance, oil, drive chain maintenance, coolant, brake fluid and tires. Intervals are shown in kilometres by default and can be switched to miles.
Sourced from Honda NC700D Integra 2012 Owner's Manual (AHM/US or UK/English Edition), via ManualsLib (this document covers model years 2012–2013): manualslib.com
Full schedule
| Task | Interval | Difficulty | Notes |
|---|---|---|---|
| Fuel Line Inspection | Every 12,800 km | Moderate | Inspect fuel line and connections for leaks, cracks, or deterioration. |
| Fuel Level Check | See notes | Easy | Check fuel level before riding; top up as needed. |
| Throttle Operation Inspection | Every 12,800 km | Easy–Moderate | Inspect throttle grip free play; verify smooth operation. |
| Spark Plug Inspection and Replacement | Every 25,600 km · Replace every 51,200 km | Easy–Moderate | Inspect spark plug every 16,000 mi; replace every 32,000 mi. |
| Air Cleaner Element Replacement | Every 19,200 km | Easy | Replace the air cleaner element. |
| Valve Clearance Inspection | Every 12,800 km | Advanced | Inspect and adjust intake/exhaust valve clearances. |
| Engine Oil Change | Every 12,800 km (first at 1,000 km) · Every 12 months | Easy | Drain and replace engine oil. |
| Engine Oil Filter Replacement | Every 12,800 km (first at 1,000 km) · Every 12 months | Easy | Replace engine oil filter. |
| DCT Clutch Oil Filter Replacement | Every 25,600 km (first at 1,000 km) | Easy | Replace DCT clutch oil filter (separate from the engine oil filter). |
| Engine Idle Speed Inspection | Every 12,800 km (first at 600 km) | Easy–Moderate | Inspect engine idle speed. |
| Engine Stop Switch Inspection | See notes | Easy | Check engine stop switch operation. |
| Drive Chain Slider Inspection | Every 12,800 km | Easy | Inspect drive chain slider for wear. |
| Brake Pad Wear Inspection | Every 6,400 km | Moderate | Inspect front and rear brake pads for wear. |
| Crankcase Breather Inspection | Every 6,000 km | Easy | Clean crankcase breather system. |
| Radiator Coolant Inspection and Replacement | Every 12,800 km · Replace every 36 months | Easy–Moderate | Inspect coolant level and condition; replace every 3 years. |
| Cooling System Inspection | Every 12,800 km | Easy–Moderate | Inspect cooling system (hoses, radiator, connections) for leaks and damage. |
| Evaporative Emission Control System Inspection | Every 19,200 km | Easy–Moderate | Inspect evaporative emission control system. |
| Drive Chain Inspection and Lubrication | Every 1,600 km | Easy | Inspect drive chain slack and condition; lubricate chain. |
| Brake Fluid Inspection and Replacement | Every 6,400 km · Replace every 24 months | Moderate | Inspect brake fluid level and condition; replace requires mechanical skill (footnote *4). |
| Brake System Inspection | Every 12,800 km (first at 600 km) | Moderate | Inspect overall brake system operation. |
| Brake Light Switch Inspection | Every 12,800 km | Easy | Inspect front and rear brake light switch operation. |
| Brake Lock (Parking Brake) Operation Inspection | Every 6,400 km | Moderate | Inspect DCT parking brake lock (rear brake-lock lever) operation. |
| Headlight Aim Inspection | Every 12,800 km | Easy | Check and adjust headlight beam aim. |
| Lights/Horn Check | See notes | Easy | Check that lights, indicators, and horn function correctly. |
| Side Stand Inspection | Every 12,800 km | Easy–Moderate | Inspect side stand and side-stand ignition cutoff system operation. |
| Suspension Inspection | Every 12,800 km | Easy–Moderate | Inspect front and rear suspension operation. |
| Nuts, Bolts, Fasteners Inspection | Every 12,800 km (first at 600 km) | Easy–Moderate | Inspect and tighten chassis nuts, bolts, and fasteners. |
| Wheels and Tires Inspection | Every 12,800 km | Moderate | Inspect wheels for damage and tires for wear/damage; check tire pressure. |
| Steering Head Bearings Inspection | Every 12,800 km (first at 600 km) | Advanced | Inspect steering head bearings for looseness or damage. |
No maintenance items match your search.
Easy: basic tools, straightforward Easy–Moderate: varies by task — somewhere between the two Moderate: some mechanical know-how helps Advanced: specialized tools/skill, still DIY-doable Expert: significant experience required Professional: dealer or shop recommended
What's due?
Enter your current mileage (km) to see what's coming up.
Related bikes
Spot something wrong?
Tell us what needs fixing on the 2012 Honda Integra NC700D schedule above.